SLES 10 SP1 When installing and using UUID, installation fails
This document (3926250) is provided subject to the disclaimer at the end of this document.
Novell SUSE Linux Enterprise Server 10
During installation, when expert partitioning is used, the following configuration was attempted:
2 physical drives /dev/sda /dev/sdb (identical 37.4G)
First drive (sda) was partitioned as:
Second drive (sdb) was partitioned as:
After this, the raid tool was selected, and a raid was created on the two drives. This raid then had a partition of type LVM created on it, and the LVM tool was used to create a partition schema.
During this process, I believe the raid part, the box for "Use UUID's" was used. Sometime during formatting / creation of partitions, the SLES 10 SP1 installer was not able to locate the UUID's.
The installer itself should block the user from using UUID's that will not be able to be located once raid devices are created.
StatusReported to Engineering
This Support Knowledgebase provides a valuable tool for NetIQ/Novell/SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.
- Document ID:3926250
- Creation Date:29-JUN-07
- Modified Date:27-APR-12
- SUSESUSE Linux Enterprise Server
Did this document solve your problem? Provide Feedback< Back to Support Search