Unable to PXE boot a server running EFI

This document (000020298) is provided subject to the disclaimer at the end of this document.

Environment

SUSE Manager Server 4.2

Situation

When performing a PXE boot from a system with EFI, the server comes directly back to the EFI menu.

When performing a network trace, the following can be seen:

tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 500 bytes
08:46:56.483073 IP xxx.xxx.xxx.xxx.netview-aix-11 > server.name.tftp:  43 RRQ "grub/grub.efi" octet tsize 0 blksize 1468

Resolution

Change the following in /etc/cobbler/settings.:
bootloaders_dir: "/usr/share/syslinux"
To:
bootloaders_dir: "/var/lib/cobbler/loaders"
After the file is save, perform:
systemctl restart cobblerd
cobbler sync

Cause

The problem is a wrong parameter in /etc/cobbler/settings.

Status

Reported to Engineering

Disclaimer

This Support Knowledgebase provides a valuable tool for SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.

  • Document ID:000020298
  • Creation Date: 25-Jun-2021
  • Modified Date:25-Jun-2021
    • SUSE Manager Server

< Back to Support Search

For questions or concerns with the SUSE Knowledgebase please contact: tidfeedback@suse.com

SUSE Support Forums

Get your questions answered by experienced Sys Ops or interact with other SUSE community experts.

Join Our Community

Support Resources

Learn how to get the most from the technical support you receive with your SUSE Subscription, Premium Support, Academic Program, or Partner Program.


SUSE Customer Support Quick Reference Guide SUSE Technical Support Handbook Update Advisories
Support FAQ

Open an Incident

Open an incident with SUSE Technical Support, manage your subscriptions, download patches, or manage user access.

Go to Customer Center