"salt-run state.orch ceph.stage.4" hangs on ceph.igw.restart after add rados gateway role to iscsi nodes.

This document (000019616) is provided subject to the disclaimer at the end of this document.

Environment

SUSE Enterprise Storage 6

Situation

The command "salt-run state.orch ceph.stage.4" hangs on ceph.igw.restart after adding the rados gateway role to iSCSI nodes.

"salt-run state.orch ceph.stage.2" ran without error.
Also, "salt-run state.orch ceph.stage.3" ran without error.

Running "salt-run state.orch ceph.stage.4", but "deepsea monitor" shows the following:

"
[15/32] ceph.igw.restart on
ses-igw01.ses.example.com.............................................................. ⏳ (1765s)
"

Resolution

Run the following commands

salt '*' saltutil.sync_all

then
salt-run state.orch ceph.stage.4

salt-run state.orch ceph.stage.4

Cause

Customer had updated deepsea package "zypper up deepsea", but did not sync the deepsea modules to the nodes in the cluster with "salt '*' saltutil.sync_all".

Status

Top Issue

Additional Information

Running the command "salt-run state.orch ceph.stage.0" will also resolve the issue, as stage.0 will also execute "salt '*' saltutil.sync_all", the entire cluster is patched in a serial process.

Disclaimer

This Support Knowledgebase provides a valuable tool for SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.