Performance issues after upgrade from SLES11 SP1 to SP2 or SP3

This document (7011982) is provided subject to the disclaimer at the end of this document.

Environment


SUSE Linux Enterprise Server 11 Service Pack 2
SUSE Linux Enterprise Server 11 Service Pack 3
 

Situation

An application is notably slower with SP2 compared to SP1. Tuning the dirty ratio of the virtual memory or disabling transparent hugepages (THP) doesn't improve the situation. 
Same problem happens with SUSE Linux Enterprise Server 11 Service Pack 3.

Resolution

For  SUSE Linux Enterprise Server 11 SP3, engineering fixed this issue with two updates of the packages Linux Kernel and cpupower. It's required to update at least to versions:

SUSE Linux Enterprise Server 11 SP3:
kernel-$FLAVOUR-3.0.101-0.15
cpupower-2.6.39-2.21

After updating to these package versions, available and used C-states can be shown with:

# cpupower idle-info

The desired C-State can be set with e.g.:

# cpupower idle-set -d 3

C-state no 3 gets disabled (not used by the kernel anymore) at runtime

# cpupower idle-set -e 3

will re-enable this state.

Two manpages have been added to the cpupower update as well which include more
detailed information:

cpupower-idle-info(1) and cpupower-idle-set(1)

 

Cause

On specific HW it may happen that a device is throwing interrupts with a frequency where the kernel thinks it makes sense to enter deeper CPU sleep states. Depending on this interrupt frequency and the CPU wakeup latency of the entered C-state, a decrease in IO performance can be seen.

Additional Information


SUSE Linux Enterprise Server 11 SP2:

Since SP2 is out of general support, no code fix is provided. Therefore the following boot/kernel parameter is a proper solution:
 
intel_idle.max_cstate=0

This might improve performance only when C-states for CPUs are disabled in the BIOS. If C states are enabled in the BIOS, you might still see performance issues. If that is the case, either disable them in the BIOS or additionally use the following kernel parameter:
 
processor.max_cstate=0

This disables C-states on kernel level.

Disclaimer

This Support Knowledgebase provides a valuable tool for SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.

  • Document ID:7011982
  • Creation Date: 19-Mar-2013
  • Modified Date:10-Mar-2021
    • SUSE Linux Enterprise Server

< Back to Support Search

For questions or concerns with the SUSE Knowledgebase please contact: tidfeedback[at]suse.com

SUSE Support Forums

Get your questions answered by experienced Sys Ops or interact with other SUSE community experts.

Join Our Community

Support Resources

Learn how to get the most from the technical support you receive with your SUSE Subscription, Premium Support, Academic Program, or Partner Program.


SUSE Customer Support Quick Reference Guide SUSE Technical Support Handbook Update Advisories
Support FAQ

Open an Incident

Open an incident with SUSE Technical Support, manage your subscriptions, download patches, or manage user access.

Go to Customer Center