How to configure network parameters for AutoYaST network installation
This document (3655724) is provided subject to the disclaimer at the end of this document.
must be set manually. The two possible scenarios in which this would have to be done are for network
installation via AuotYaST and for an existing installation.
The ethtool boot parameter may be used to configure the network parameters for network
installation via AutoYaST. This boot parameter can be placed in an AutoYaST info file, or when
booting from the installation media, entered into the boot options field of the boot menu.
For more information on ethtool and ethtool parameters, see man 8 ethtool.
For example, to set eth0 to 100Mbps Full duplex and turn off autonegotiation:
ethtool=eth0="speed 100 duplex full autoneg off"
It is also possible to set multiple interfaces to the same configuration with this parameter.
For example. to set eth0 and eth1 to 100Mbps Full duplex and turn off autonegotiation:
ethtool=eth[0-1]="speed 100 duplex full autoneg off"
This boot parameter only needs to be used once during installation for the setting to be persistent.
To make this change on an existing installation:
- Edit /etc/sysconfig/network/ifcfg-eth-id-, where is the MAC address of the NIC you want to configure. If you don't know the MAC addres, you can use the ifconfig command to find which device (eth0, eth1, etc) is associated with which MAC. See man 8 ifconfig for more information on the ifconfig command.
- Change the ETHTOOL_OPTIONS line from:
ETHTOOL_OPTIONS='speed 100 duplex full autoneg off'
These changes will go into effect at the next reboot, restart of the network services, or by bringing the interface down and back up with the ifdown and ifup commands.
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 100baseT/Full
Advertised auto-negotiation: Yes
Port: Twisted Pair
Supports Wake-on: pumbg
Current message level: 0x00000033 (51)
Link detected: yes
This Support Knowledgebase provides a valuable tool for SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.
- Document ID:3655724
- Creation Date: 05-Jun-2007
- Modified Date:19-Mar-2021
- SUSE Linux Enterprise Desktop
- SUSE Linux Enterprise Server
For questions or concerns with the SUSE Knowledgebase please contact: email@example.com