ZIPL failure with grub2-install command
This document (000019893) is provided subject to the disclaimer at the end of this document.
SUSE Linux Eterprise Server 15 SP1
SUSE Linux Eterprise Server 15
SUSE Linux Eterprise Server 12 SP5
SUSE Linux Eterprise Server 12 SP4
SUSE Linux Eterprise Server 12 SP3
SUSE Linux Eterprise Server 12 SP2
SUSE Linux Eterprise Server 12 SP1
SUSE Linux Eterprise Server 12
following error might appear:
Using config file '/boot/zipl/config' (from command line)
Error: The length of the parameters line (1755 bytes) exceeds the allowed maximum (896 bytes)
grub2-install: error: `grub2-zipl-setup' failed.
The first size inside the brackets can be anything over 896 bytes .
The second size inside the brackets is always 896 bytes .
There is GRUB_CMDLINE_LINUX_DEFAULT definition that is unreasonably long.
Could be that the same parameter is repeated.
Clean the definition and leave the only bare minimum required.
Retry kernel update / grub2-install command .
and then uses zipl using that file.
If the GRUB_CMDLINE_LINUX_DEFAULT definition is too long that fouls up the command.
This Support Knowledgebase provides a valuable tool for SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.
- Document ID:000019893
- Creation Date: 01-Mar-2021
- Modified Date:03-Mar-2021
- SUSE Linux Enterprise Server
For questions or concerns with the SUSE Knowledgebase please contact: email@example.com