|
| PowerEdge 2650
Network Server
Dell Incorporated | 30 Jun 2004
75447 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
SUSE® LINUX Enterprise Server 8 for x86 |
SUSE® Standard Server v8.0 |
SUSE® LINUX Enterprise Server 7 for IA-32 |
Product Description
PowerEdge 2650 L
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | DELL Dual XEON CPU board PowerEdge 2650 |
BIOS/uEFI: | Dell/Phoenix A04 |
CPU: | 2 Intel
Xeon® 2.40 GHz |
RAM: | 768 MB |
Video Adapter: | ATI
RAGE™ XL |
Host Bus Adapter: | Dell
Dell PowerEdge Expandable RAID Controller 3/Di |
Hard Disk Drive: | Seagate®
ST318406LC
, Ultra320 SCSI Hitachi
DK32CJ-36MC
, Ultra320 SCSI |
CD/DVD: | Unknown
ATAPI CD-ROM
, ATAPI |
Floppy Type: | 1.44 |
Test Kit: | SUSE Certification Suite |
Config Notes
- SLES 7
Certified for:
Kernel 2.4.18 + Patch-CD2
Kernel 2.4.18 + Patch-CD3
Obligatory: use aacraid update-driver-disk from our Maintenance Web.
Obligatory: use bcm5700 update-driver-disk from our Maintenance Web if you need to install via the network card.
After the installation of Patch CD2/CD3: make sure that the "alias ethx" lines in /etc/modules.conf points to the bcm5700 module.
Boot config needs to be installed manually.
- SLES 8
NEEDED: kernel boot parameter "acpi=oldboot".
- SLES 8 - SP1
Certified for Kernel 2.4.19-196-64GB-SMP
DMA must not be enabled on this host.
NEEDED: kernel boot parameter "acpi=oldboot".
- SLES 8 - SP3
NEEDED: kernel boot parameter "acpi=oldboot".
- SL Standard Server 8 - SP3
NEEDED: kernel boot parameter "acpi=oldboot".
To update your SL Standard Server 8 installation by means of
United Linux 1.0 SP3, mount CD 1 of this service pack
somewhere and invoke the script
/my-mountpoint-of-SP3-CD1/install.sh.
|
Adapters and Drivers
| | | | | |
Dell
Dell PowerEdge Expandable RAID Controller 3/Di |
ATI
RAGE™ XL |
Broadcom®
Broadcom(R) BCM5701KHB |
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Dell Incorporated
1 DELL WAY
ROUND ROCK
, TX
78682
|