Network Server
Fujitsu Siemens Computers
13 Sep 2007

YES CERTIFIED with the following products:
Operating Systems:
  SUSE® LINUX Enterprise Server 10 for AMD64® & Intel® EM64T® with XEN     Service Pack 1 for SUSE® SLES 10

Virtual Machines (Guests OS):
  SLES 10 for AMD64 & EM64T
    Arch:  64     Mode:  Paravirtualized   Support Pack:  Service Pack 1 for SLES 10
  SLES 10 for x86
    Arch:  32pae     Mode:  Paravirtualized   Support Pack:  Service Pack 1 for SLES 10
  SLES 9 for AMD64 & EM64T
    Arch:  64     Mode:  Fully Virtualized   Support Pack:  Service Pack 3 for SLES 9
  SLES 9 for x86
    Arch:  32     Mode:  Fully Virtualized   Support Pack:  Service Pack 3 for SLES 9
  Windows 2003 Server R2
    Arch:  64     Mode:  Fully Virtualized   Support Pack:  Service Pack 2 for Windows 2003

Product Description
The PRIMERGY BX620 S4 succeeding the BX620 S3 server blade provides all of it's predecessor's future oriented technologies and even more: Latest Dual- and Quad-Core processors from Intel® (up to 3 GHz), memory (FBD, extended mirroring), storage (modular storage controller configuration) and 2.5 inch SAS or SATA hard disk drives. Very impressive performance and flexibility enhancements are granted through six on-board Gigabit Ethernet interfaces, operating within a PRIMERGY BX600 S3 blade server chassis in combination with two Gigabit Ethernet switch blades offering 2x 30 downlinks plus 2x 12 uplinks for optimum LAN connectivity. Due to its backward compatibility, the PRIMERGY BX620 S4 may be installed in the BX600 S2 chassis as well. Based on those capabilities the PRIMERGY BX620 S4 enables customers to run larger and more (with virtualization based on VMware or Xen) applications compared to all other existing PRIMERGY BX600 Dual Server Blades. With its new modular design for different requirements, the customer can create specific configurations in combination with SAS or SATA hard disks to meet different usage scenarios. For example a customer can create a low cost platform with SATA hard disk and the SATA storage module or featured platform with SAS hard disks and a SAS storage module, which can take up a PCI Express card in addition. For high demands regarding security a SAS storage module with RAID1 and Cache/iTBBU is offered. All those configurations can be established very easy in the factory or in the field, because the different storage modules come with an intelligent mounting cage for the server blade front. For more details please refer to the data sheet at:

Tested Configuration:
Computer Type:Blade Module
Mother Board Revision:D2571
BIOS:080012 Rev.3A08.2571
CPU:2 Intel®  Quad-Core Xeon® Processor X5355 2.66 GHz
Bus Type:64-bit/133MHz PCI-X
2 USB Ports
Video Adapter:ATI®  ES1000
Host Bus Adapter:LSI Logic®  LSISAS 1068 , Serial SCSI (SAS)
Hard Disk Drive:2 Seagate®  ST9146802SS , Serial SCSI (SAS)
Floppy Type:NONE
Test Kit:System Certification Kit 6.1.0-0.28

Config Notes

Adapters and Drivers
ATI®  ES1000
Driver Type: Video DriverFile Name:
File Date: 20-Sep-2006File Size: 2178256
Checksum: a4ebe7953fef8787e8a02230fd963802

6 Broadcom®  Broadcom NetXtreme Gigabit Ethernet Adapter
Driver Type: LAN DriverFile Name: tg3.ko
File Date: 31-Aug-2007File Size: 143224
Checksum: bb177f12ba3934d5c8748c5cb1b708a9

LSI Logic®  LSISAS 1068
Driver Type: HBA DriverFile Name: mptsas.ko
File Date: 31-Aug-2007File Size: 40896
Checksum: 33f07dcce07a376d9aca76204df8f4ba

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually YES CERTIFIED components may be exchanged for other YES CERTIFIED components. For more information on swapping YES CERTIFIED components, please access the following web page:

For more information regarding the specific test configuration, please contact:

Fujitsu Siemens Computers
Heinz-Nixdorf-Ring 1
D-33106 Paderborn
Voice: +49 5251 8 15376
Fax: +49 5251 8 333 15376