PRIMERGY® RX100 S4
Network Server
Fujitsu Siemens Computers
08 Mar 2007
88301

YES CERTIFIED with the following products:
Operating Systems:
  Open Enterprise Server     Support Pack 2 for Open Enterprise Server
  SUSE® LINUX Enterprise Server 9 for x86     Service Pack 3 for SUSE® SLES 9

Other Products:
  Novell® Open Workgroup Suite SBE    eDirectory™ 8.7 
  Novell iPrint 5.0    Novell® iManager 2.5 
  Novell iFolder® 2.1    Apache2 Web Server 2.0 


Product Description
As business processes and customer bases grow and rely more on Internet technology, data centers face the challenge of rapid enhancements of their front end infrastructure services. Increasingly they are looking for a platform solution that has minimum impact on their budgets, yet is easy to deploy and simple to operate. That is where the RX100 S4 optimally fits in. With technical evolutions like Dual-Core Intel® Xeon® UP 3000 series CPU, integrated SAS or SATA RAID 0, 1 data protection and 8 GB direct addressable memory the PRIMERGY RX100 S4 matches your business application requirements perfectly. It combines the benefits of cost-optimized SATA or SAS disk technology with a spacesaving 1 U form factor of less than 60 cm in depth. This makes it easy to integrate into any rack enclosures. The set of integrated network and management functions make it a good choice for budget-sensitive infrastructure solutions. Fore more information please refer to the data sheet at: http://extranet.fujitsu-siemens.com/vil/pc/vil/primergy/model_line_100/rack_server/ds_prim-rx100_s4.pdf

Tested Configuration:
Computer Type:Rack Mount
Mother Board Revision:D2532
BIOS:PhoenixBIOS 4.06 Rev. 1.04.2532
CPU:Intel®  Dual-Core Xeon® Processor 3060 2.40 GHz
RAM:4 GB
Bus Type:64-bit/100MHz PCI-X
3 USB Ports
Serial
PCI Express X8
Video Adapter:Matrox®  MGA G200e
Host Bus Adapter:LSI Logic®  LSISAS 1068 , Serial SCSI (SAS)
Intel®  Integrated 82801GR ICH7R , IDE
Hard Disk Drive:2 Seagate®  ST373454SS Cheetah 15.4-SAS , Serial SCSI (SAS)
CD/DVD:LG  GCC-4244N , IDE
Floppy Type:NONE
Test Kit:System Certification Kit 6.0.16


Config Notes
Please note that the listed HBA and LAN drivers are delivered and supported by Fujitsu Siemens Computers. Please either install the system using ServerStart CD or download the drivers from http://support.fujitsu-siemens.com


Adapters and Drivers
2 Broadcom®  Broadcom NetExtreme Gigabit Ethernet Adapter
Driver Type: LAN DriverFile Name: tg3.ko
File Date: 28-Mar-2006File Size: 131945
Checksum: a9d52e7c98ee238ef83e452e000990e3

LSI Logic®  LSISAS 1068
Driver Type: HBA DriverFile Name: mptsas.ko
File Date: 12-Dec-2005File Size: 28698

Intel®  Integrated 82801GR ICH7R
Driver Type: HBA DriverFile Name: PIIX IDE
File Date: 12-Dec-2005File Size: 1688207

Matrox®  MGA G200e

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually YES CERTIFIED components may be exchanged for other YES CERTIFIED components. For more information on swapping YES CERTIFIED components, please access the following web page:

http://developer.novell.com/devres/system/policy/exchange.htm

For more information regarding the specific test configuration, please contact:

Fujitsu Siemens Computers
FSC EP PS QA1
Buergermeister-Ulrich-Str. 100
Augsburg   D-86199
GERMANY
Voice: +49 821 804 3293
Fax: +49 821 804 83293
Website: http://www.fujitsu-siemens.com/