|
| QLA210 2Gbps Single Port Fibre Channel PCI-X HBA
Device Driver / Host Bus Adapter
QLogic Corporation | 19 Dec 2006
87407 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
Product Description
The QLA210 is a Low-Price, RoHS compliant, extremely easy to use SANblade HBA offering 20,000 IOPs at 2 Gbps FC speeds. It supports 133MHz PCI-X host bus and is fully backward compatible with 33/66 MHz PCI and 66/100 MHz PCI-X. The QLA210 is a reliable, scalable, resilient HBA based on a fully integrated single-chip solution; with integrated RISC that completely offloads Host CPU.
Primary Driver File(s):
| | | | | |
| File Name: SCSIHD.CDM | File Version: 3.03e |
| File Date: 29-Nov-2005 | File Size: 32119 |
| Checksum: |
|
File URL: |
| File Name: QL2X00.HAM | File Version: 6.90o |
| File Date: 08-Dec-2006 | File Size: 537315 |
| Checksum: -1 |
|
File URL: |
Driver Support File(s)
| | | | | |
| File Name: SCSIHD.DDI | File Version: 3.00 |
| File Date: 06-Jul-2005 | File Size: 30108 |
| Checksum: |
|
File URL: |
| File Name: QL2X00.DDI | File Version: 2.09 |
| File Date: 23-Mar-2006 | File Size: 29855 |
|
|
File URL: |
Host Bus Adapter(s)
Product Name | QLA210 2Gbps Single Port Fibre Channel PCI-X HBA |
Version: | 01 A |
Interface: | FibreChannel |
Ports and Bus Types: | 32-Bit PCI |
Chipset: | SP212 |
BIOS/uEFI: | 1.23 |
Firmware: | 3.03.10 |
Channels: | 1 |
Tested Configuration:
Hard Disk Drive: | 2 Seagate®
ST336753FC
, Firmware: 0005
, Interface: FibreChannel |
Switching System: | QLogic
SANbox 5602 4Gb Fibre Channel Switch
, Interface: FibreChannel
, Firmware: v5.0.1.10
, Switch Speed: 4Gb
, Switch Ports: 20 |
Test Kit: | Diskkit 4.05.01 - 02-17-2006 |
Config Notes
- 'Hardware Hot Plug' supported but was not tested.
|
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
QLogic Corporation
26650 Aliso Viejo Parkway
P.O. Box 5033
Aliso Viejo
, CA
92656
|