|
| QLA2340 64-Bit PCI-X to 2-Gigabit Fibre Channel Adapter
Device Driver / Host Bus Adapter
QLogic Corporation | 19 Dec 2006
87398 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
Product Description
Based on QLogic's award-winning Fibre Channel architecture, the SANblade QLA2340 Series are 64-bit, 66MHz PCI/133 MHz PCI-X to 2-Gigabit Fibre Channel Host Bus adapters. Targeted specifically for Storage Area Neworks (SANs) and server clustering environments, the SANblade QLA2340 Series has been optimized fo peak performance and real-world scalability.
Primary Driver File(s):
| | | | | |
| File Name: SCSIHD.CDM | File Version: 3.03e |
| File Date: 29-Nov-2005 | File Size: 32119 |
| Checksum: |
|
File URL: |
| File Name: QL2X00.HAM | File Version: 6.90o |
| File Date: 08-Dec-2006 | File Size: 537315 |
| Checksum: -1 |
|
File URL: |
Driver Support File(s)
| | | | | |
| File Name: SCSIHD.DDI | File Version: 3.00 |
| File Date: 06-Jul-2005 | File Size: 30108 |
| Checksum: |
|
File URL: |
| File Name: QL2X00.DDI | File Version: 2.09 |
| File Date: 23-Mar-2006 | File Size: 29855 |
|
|
File URL: |
Host Bus Adapter(s)
Product Name | QLA2340 64-Bit PCI-X to 2-Gigabit Fibre Channel Adapter |
Version: | 09 F |
Interface: | FibreChannel |
Ports and Bus Types: | 64-bit/133MHz PCI-X |
Chipset: | ISP2312 |
BIOS/uEFI: | 1.52 |
Firmware: | 3.03.21 |
Channels: | 1 |
Tested Configuration:
Hard Disk Drive: | 2 Seagate®
ST336753FC
, Firmware: 0005
, Interface: FibreChannel |
Switching System: | QLogic
SANbox 5602 4Gb Fibre Channel Switch
, Interface: FibreChannel
, Firmware: v5.0.1.10
, Switch Speed: $Gb
, Switch Ports: 20 |
Test Kit: | Diskkit 4.05.01 - 02-17-2006 |
Config Notes
- 'Hardware Hot Plug' supported but was not tested.
|
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
QLogic Corporation
26650 Aliso Viejo Parkway
P.O. Box 5033
Aliso Viejo
, CA
92656
|