PRIMERGY® TX300 S3
Network Server
Fujitsu Siemens Computers
31 Oct 2006
86703

YES CERTIFIED with the following products:
Operating Systems:
  SUSE® LINUX Enterprise Server 9 for AMD64® & Intel® EM64T®     Service Pack 3 for SUSE® SLES 9


Product Description
Are you looking for business continuity, especially for your core business applications? Our TX300 servers provide peace of mind when choosing a suitable server platform, because their set of integrated redundancy and hot-plug features assures continuous operation of the platform and thus high application reliability. It is offering the breakthrough performance features of leading edge Intel® Dual-Core Xeon® 5100 sequence CPUs embed- ded in a powerful design with an 8-port SAS controller and fast PCIe links and PCI-X busses. Continuity is assured with the hot-plug power supply, hot-plug PCIe, hot-plug redundant fans, RAID 5 embedded and redundant dual LAN features. For your high capacity needs, PRIMERGY TX300 S3 provides 2 memory banks with 2 branches each for memory mirroring with up to 32 GB PC2-4200F (533 MHz) or 5300F (667 MHz) RAM memory for enhancing data transfer throughput. And the system only needs a few additional options to meet the highest demands, such as clustering or disaster-tolerant setup. For business-critical remote sites, the PRIMERGY TX300 S3 is the right platform. For more information please refer to the data sheet at: http://extranet.fujitsu-siemens.com/vil/pc/vil/primergy/model_line_200/tower_server/ds_prim-tx300-s3.pdf

Tested Configuration:
Computer Type:Tower
Mother Board Revision:D2129
BIOS:PhoenixBIOS 4.06 Rev. 1.03.2129
CPU:2 Intel®  Dual-Core Xeon® Processor 5160 3.00 GHz
RAM:8 GB
Bus Type:PCI Express X8
2 PCI Express X4
2 64-bit/133MHz PCI-X
3 USB Ports
2 Serial
Video Adapter:Matrox®  MGA G200e
Host Bus Adapter:Intel®  Integrated 6321ESB ICH , Serial ATA (SATA)
LSI Logic®  LSISAS 1068 , Serial SCSI (SAS)
Hard Disk Drive:3 Seagate®  ST373454SS Cheetah 15.4-SAS , Serial SCSI (SAS)
CD/DVD:LG  GCC-4244N , IDE
Floppy Type:1.44
Test Kit:System Certification Kit 6.0.16


Config Notes
Please use the ServerStart CD supplied with the system to configure and install it in order to achieve a certified environment.


Adapters and Drivers
Broadcom®  Broadcom NetXtreme Gigabit Ethernet Adapter
Driver Type: LAN DriverFile Name: tg3.ko
File Date: 28-Mar-2006File Size: 145803
Checksum: b24ee84f384c97185785534874d10977

Intel®  Integrated 6321ESB ICH
Driver Type: HBA DriverFile Name: PIIX IDE
File Date: 13-Dec-2005File Size: 1743905
Checksum: 15f089aa1f30cb1989ba2773e31794be

Driver Type: HBA DriverFile Name: ata_piix.ko
File Date: 13-Dec-2005File Size: 34320

LSI Logic®  LSISAS 1068
Driver Type: HBA DriverFile Name: megaraid_sas.ko
File Date: 13-Apr-2006File Size: 55549
Checksum: 8da86418556a921af67b16c1a873485f


The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually YES CERTIFIED components may be exchanged for other YES CERTIFIED components. For more information on swapping YES CERTIFIED components, please access the following web page:

http://developer.novell.com/devres/system/policy/exchange.htm

For more information regarding the specific test configuration, please contact:

Fujitsu Siemens Computers
FSC EP PS QA1
Buergermeister-Ulrich-Str. 100
Augsburg   D-86199
GERMANY
Voice: +49-821-804-3293
Fax: +49-821-804-3499