|
| LSISAS1068
Device Driver / Host Bus Adapter
LSI Logic, Inc. | 06 Sep 2006
85820 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
NetWare® 6.5
Support Pack 5 for NetWare® 6.5 |
Product Description
LSI SAS HBA
Primary Driver File(s):
| | | | | |
| File Name: SCSIHD.CDM | File Version: 3.03e |
| File Date: 29-Nov-2005 | File Size: 32119 |
| Checksum: |
|
File URL: |
| File Name: LSIMPTNW.HAM | File Version: 4.01f |
| File Date: 16-Jun-2006 | File Size: 244494 |
|
|
File URL: |
Driver Support File(s)
| | | | | |
| File Name: SCSIHD.DDI | File Version: 3.00 |
| File Date: 06-Jul-2005 | File Size: 30108 |
| Checksum: |
|
File URL: |
| File Name: LSIMPTNW.DDI | File Version: 4.01.06 |
| File Date: 16-Jun-2006 | File Size: 36151 |
|
|
File URL: |
Host Bus Adapter(s)
Product Name | LSISAS1068 |
Version: | B0 |
Interface: | Serial SCSI (SAS) |
Ports and Bus Types: | 32-Bit PCI |
Chipset: | 1068 |
BIOS/uEFI: | 6.08 |
Firmware: | 0.09.23 |
Channels: | 2 |
Tested Configuration:
Hard Disk Drive: | Maxtor®
ATLAS10K5_73SAS
, Firmware: BG3H
, Interface: Serial SCSI (SAS) Maxtor®
ATLAS15K2_147SAS
, Firmware: BG34
, Interface: Serial SCSI (SAS) |
System: | SuperMicro
X6DHE-G2 |
Test Kit: | Diskkit 4.05.01 - 02-17-2006 |
Config Notes
- 'Hardware Hot Plug' supported but was not tested.
- Tape device control functions tested and supported: activate/deactivate, mount/dismount, lock/unlock, eject, quick erase, security erase, retension.
- Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape, multiple file marks, single set marks, multiple set marks, locate data blocks.
- Tape device control functions tested and supported: activate/deactivate, mount/dismount, lock/unlock, eject, security erase.
- Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape, locate data blocks.
- Tape spanning supported
|
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
LSI Logic, Inc.
4420 Arrowswest Dr
Colorado Springs
, CO
80907
Voice: 719-533-7521
Website: www.lsilogic.com
|