|
| QLE2362 PCI Express to 2-Gigabit Fibre Channel
Device Driver / Host Bus Adapter
QLogic Corporation | 07 Aug 2006
85176 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
Product Description
The QLE2362 HBA is an intelligent, high-performance host bus adapter designed for the next generation serial host bus called PCI Express. The QLE2362 HBA is a single-slot PCI Express bus expansion board that interfaces a four-lane PCI Express bus to two FC optical media buses. It supports one-, two-, and four-lane operations on the host bus and supports all FC peripherals that support private loop direct attach (PLDA) and fabric loop attach (FLA). Installation of the QLE2362 HBA is quick and easy. The QLE2362 provides a level of performance and flexibility that is unsurpassed in the storage industry.
Primary Driver File(s):
| | | | | |
| File Name: SCSIHD.CDM | File Version: 3.03e |
| File Date: 29-Nov-2005 | File Size: 32119 |
| Checksum: |
|
File URL: |
| File Name: QL2X00.HAM | File Version: 6.90m |
| File Date: 14-Jul-2006 | File Size: 534131 |
| Checksum: -1 |
|
File URL: |
Driver Support File(s)
| | | | | |
| File Name: SCSIHD.DDI | File Version: 3.00 |
| File Date: 06-Jul-2005 | File Size: 30108 |
| Checksum: |
|
File URL: |
| File Name: QL2X00.DDI | File Version: 2.09 |
| File Date: 23-Mar-2006 | File Size: 29855 |
|
|
File URL: |
Host Bus Adapter(s)
Product Name | QLE2362 PCI Express to 2-Gigabit Fibre Channel |
Version: | 01 B |
Interface: | FibreChannel |
Ports and Bus Types: | PCI Express X4 |
Chipset: | ISP2322 |
BIOS/uEFI: | 1.05 |
Firmware: | 3.03.20 |
Channels: | 2 |
Tested Configuration:
Hard Disk Drive: | 2 Seagate®
ST336753FC
, Firmware: 0005
, Interface: FibreChannel |
Switching System: | QLogic
SANbox 5602 4Gb Fibre Channel Switch
, Interface: FibreChannel
, Firmware: 5.0.0.27.0
, Switch Speed: 4 Gb
, Switch Ports: 20 |
Test Kit: | Diskkit 4.05.01 - 02-17-2006 |
Config Notes
- 'Hardware Hot Plug' supported but was not tested.
|
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
QLogic Corporation
3545 Harbor Blvd.
Costa Mesa
, CA
92626
Voice: 714-668-5038
Fax: 714-668-5384
Website: http://www.qlogic.com
|