|
| QLA200 PCI-X to 2-Gigabit Fibre Channel
Device Driver / Host Bus Adapter
QLogic Corporation | 07 Aug 2006
85174 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
Product Description
The QLA200 is a Low-Price, extremely easy to use SANblade HBA offering 20,000 IOPs at 2 Gbps FC speeds. It supports 133MHz PCI-X host bus and is fully backward compatible with 33/66 MHz PCI and 66/100 MHz PCI-X. The QLA200 is a reliable, scalable, resilient HBA based on a fully integrated single-chip solution; with integrated RISC that completely offloads Host CPU.
Primary Driver File(s):
| | | | | |
| File Name: SCSIHD.CDM | File Version: 3.03e |
| File Date: 29-Nov-2005 | File Size: 32119 |
| Checksum: |
|
File URL: |
| File Name: QL2X00.HAM | File Version: 6.90m |
| File Date: 14-Jul-2006 | File Size: 534131 |
| Checksum: -1 |
|
File URL: |
Driver Support File(s)
| | | | | |
| File Name: SCSIHD.DDI | File Version: 3.00 |
| File Date: 06-Jul-2005 | File Size: 30108 |
| Checksum: |
|
File URL: |
| File Name: QL2X00.DDI | File Version: 2.09 |
| File Date: 23-Mar-2006 | File Size: 29855 |
|
|
File URL: |
Host Bus Adapter(s)
Product Name | QLA200 PCI-X to 2-Gigabit Fibre Channel |
Version: | 02 A |
Interface: | FibreChannel |
Ports and Bus Types: | PCI |
Chipset: | SP202 |
BIOS/uEFI: | 1.23 |
Firmware: | 3.03.20 |
Channels: | 1 |
Tested Configuration:
Hard Disk Drive: | 2 Seagate®
ST336753FC
, Firmware: 0005
, Interface: FibreChannel |
Switching System: | QLogic
SANbox 5602 4Gb Fibre Channel Switch
, Interface: FibreChannel
, Firmware: 5.0.0.27.0
, Switch Speed: 4 Gb
, Switch Ports: 20 |
Test Kit: | Diskkit 4.05.01 - 02-17-2006 |
Config Notes
- 'Hardware Hot Plug' supported but was not tested.
|
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
QLogic Corporation
3545 Harbor Blvd.
Costa Mesa
, CA
92626
Voice: 714-668-5038
Fax: 714-668-5384
Website: http://www.qlogic.com
|