QLE2362 2-Gbps Fibre Channel to PCI Express HBA

QLE2362 2-Gbps Fibre Channel to PCI Express HBA
Device Driver / Host Bus Adapter
QLogic Corporation
24 Mar 2006
83665

YES CERTIFIED with the following products:
Operating Systems:
  NetWare® 6.5

Product Description
The QLE2362 HBA is an intelligent, high-performance host bus adapter designed for the next generation serial host bus called PCI Express. The QLE2362 HBA is a single-slot PCI Express bus expansion board that interfaces a four-lane PCI Express bus to two FC optical media buses. It supports one-, two-, and four-lane operations on the host bus and supports all FC peripherals that support private loop direct attach (PLDA) and fabric loop attach (FLA). Installation of the QLE2362 HBA is quick and easy. The QLE2362 provides a level of performance and flexibility that is unsurpassed in the storage industry.

Primary Driver File(s):
SCSIHD.CDM  ( 32119 bytes   29-Nov-2005 15:28   3.03e    )   
QL2X00.HAM  ( 530179 bytes   17-Mar-2006 14:40   6.90i    )   

Driver Support File(s)
QL2X00.DDI  ( 29855 bytes   23-Mar-2006 13:30   2.09)
SCSIHD.DDI  ( 30108 bytes   06-Jul-2005 16:53   3.00)

Host Bus Adapter(s)
Product NameQLE2362 2-Gbps Fibre Channel to PCI Express HBA
Version:01-B
Interface:FibreChannel
Bus Type:PCI Express X4
Chipset:ISP2322
BIOS:1.05
Firmware:3.03.07
Channels:1

Tested Configuration:
Hard Disk Drive:2 Seagate®  ST336854FC , Firmware: 0003 , Interface: FibreChannel
System:Intel®  SE7520BD2V - SC5300 , Bus Type: PCI Express X4
Switching System:QLogic  SANbox 5602 4Gb Fibre Channel Switch , Interface: FibreChannel , Firmware: v5.0.0.27.0 , Switch Speed: 4Gb , Switch Ports: 20
Test Kit:Diskkit 4.05.01 - 02-17-2006

Config Notes

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

QLogic Corporation
26650 Aliso Viejo Parkway
Aliso Viejo , CA   92656
Voice: 949-389-6000
Fax: 949-389-6009
Website: http://www.qlogic.com