HP StorageWorks 8000 Enterprise Virtual Array
Storage Area Network (SAN) Device
Hewlett Packard Company
29 Jul 2005
81543

YES CERTIFIED with the following products:
Operating Systems:
  NetWare® 6.5

Product Description
The HP StorageWorks 8000 Enterprise Virtual Array is one of three next generation storage array products. Designed specifically for customers in the enterprise marketplace, by offering a high performance, high capacity, and high availability "virtual" array storage solution. It meets application specific demands for consistently high transaction I/O for the enterprise customer. The EVA8000 combined with the HP StorageWorks Command View EVA software provides a comprehensive solution designed to simplify and maximize performance. Supports up to 50.4 TB in a single cabinet and up to 72 TB with an expansion cabinet today (and more when larger disks are available) of versatile storage capacity, with any combination of high performance FC and/or low cost FATA drives with any of the supported Vraid types. Can quickly and easily add physical disks online.

Primary Driver File(s):
CPQSHD.CDM  ( 116063 bytes   22-Mar-2004 04:02   2.02    )   
QL2300.HAM  ( 528816 bytes   08-Oct-2004 15:08   6.80g    )   

Driver Support File(s)
CPQSHD.DDI  ( 8565 bytes   22-Mar-2004 04:02   2.00)
QL2300.DDI  ( 29455 bytes   28-May-2004 13:21   2.06)

Storage Area Network
Product NameHP StorageWorks 8000 Enterprise Virtual Array
Interface:FibreChannel
Firmware:V5001
Capacity:37.5 GB

Tested Configuration:
Hard Disk Drive:HP  HSV210 , Interface: FibreChannel , Firmware: V5001 , Capacity: 37.5 GB
HP  LOGICAL VOLUME , Interface: FibreChannel , Firmware: 1.80 , Capacity: 18.2 GB
Host Bus Adapter:2 QLogic  QLA2340 / QLA2342 64-Bit PCI-X to 2-Gigabit Fibre Channel Adapter , Interface: FibreChannel , Version: 3.03 , BIOS: 1.45
System:HP  ProLiant DL580 G2 Xeon™ 2.8 GHz
Test Kit:Diskkit 4.04.20 - 02-17-2005

Config Notes


The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

Hewlett Packard Company
SAN/CASL Laboratory
8000 Foothills Blvd. MS5785
Roseville , CA   95747