Adaptec SCSI Card 29320ALP
Device Driver / Host Bus Adapter
IBM
05 Nov 2004
79200

YES CERTIFIED with the following products:
Operating Systems:
  NetWare® 6.5     Support Pack 2 for NetWare® 6.5
  NetWare® 6

Product Description
The Adaptec SCSI Card 29320ALP is a low profile, 64-bit 133MHz PCI-X, single channel Ultra320 SCSI Card.

Primary Driver File(s):
NWTAPE.CDM  ( 68900 bytes   15-Oct-2003 12:03 PM   2.00n)
SCSIHD.CDM  ( 28550 bytes   21-Apr-2004 11:00 AM   3.02.06)
SCSICD.CDM  ( 22027 bytes   22-Apr-2003 03:00 PM   3.01a)
ADPU320.HAM  ( 215854 bytes   06-Aug-2004 11:23 AM   3.01m)

Driver Support File(s)
ADPU320.DDI  ( 7243 bytes   26-Aug-2003 01:53 PM   2.0)
NWTAPE.DDI  ( 6888 bytes   22-Oct-2001 08:54 AM   1.00)
SCSIHD.DDI  ( 29164 bytes   22-Oct-2003 02:52 PM   3.00)
SCSICD.DDI  ( 7309 bytes   23-Jul-1998 10:28 AM   2.00)

Host Bus Adapter(s)
Product NameAdaptec SCSI Card 29320ALP
Version:B
Interface:Ultra320 SCSI
Adapter Bus Type:PCI
Chipset:AIC-7901X
BIOS:4.30.1
Firmware:N/A

Tested Configuration
CD/DVD:PLEXTOR  CD-ROM PX-40TS
Hard Disk Drive:Maxtor®  ATLAS IV 18 WLS , Firmware: 0230 , Interface: Ultra160 SCSI
System:Dell  PowerEdge 4600
Tape Drive:Sony  SDX-400C , Firmware: 0702 , Interface: Ultra160 SCSI
Test Kit:Diskkit 4.04.10 - 09-17-2004

Config Notes
Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape.
Tape spanning supported

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

IBM
6300 Diagonal Highway
Boulder , CO   80301
Voice: (303) 924-5839
Fax: (303) 924-4662