Smart Array 642 RAID Controller
RAID Controller Adapter
Hewlett Packard Company
02 Nov 2004
79183

YES CERTIFIED with the following products:
Operating Systems:
  NetWare® 5.1     Support Pack 7 for NetWare® 5.1

Product Description
The Smart Array 642 Controller (SA-642) is a 64-bit, 133-MHz PCI-X, dual channel, SCSI array controller for entry-level hardware-based fault tolerance. Utilizing both SCSI channels of the SA-642 allows you to configure up to 6 internal and 14 external hard drives to store up to 2.9 TB of storage.

RAID Controller Adapter
Product NameSmart Array 642 RAID Controller
Adapter Bus Type:PCI
Firmware:2.26
BIOS:a
Interface:Ultra320 SCSI
Channels:2
Chipset:0046

Primary Driver File(s):
CPQSHD.CDM  ( 116063 bytes   22-Mar-2004 02:02 AM   2.02)
CPQRAID.HAM  ( 199894 bytes   25-Oct-2004 02:12 AM   2.12)

Driver Support File(s)
CPQRAID.DDI  ( 6301 bytes   25-Oct-2004 02:12 AM   2.12)
CPQSHD.DDI  ( 8566 bytes   22-Mar-2004 02:02 AM   2.00)

Tested Configuration:
Product NameSmart Array 642 RAID Controller
Hard Disk Drive:HP  BF072863BA , Interface: Ultra320 SCSI , Firmware: HPB4 , Capacity: 72.8 GB
HP  LOGICAL VOLUME , Interface: Ultra320 SCSI , Firmware: 2.26 , Capacity: 72.8 GB
System:HP  Proliant ML350 G3 , Bus Type: PCI
Test Kit:Diskkit 4.04.10 - 09-17-2004


The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

Hewlett Packard Company
Your local Hewlett-Packard
representative