|
| AIC-7901
Device Driver / Host Bus Adapter
IBM | 19 Aug 2004
76239 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
Product Description
AIC-7901-Intergrated Ultra320 SCSI Host Bus Adapter
Primary Driver File(s):
| | | | | |
| File Name: SCSIHD.CDM | File Version: 3.02c |
| File Date: 09-Dec-2003 | File Size: 28306 |
| Checksum: -1 |
|
File URL: |
| File Name: SCSICD.CDM | File Version: 3.01a |
| File Date: 22-Apr-2003 | File Size: 22027 |
| Checksum: -1 |
|
File URL: |
| File Name: NWTAPE.CDM | File Version: 2.00n |
| File Date: 15-Oct-2003 | File Size: 68900 |
|
|
File URL: |
| File Name: ADPU320.HAM | File Version: 3.01m |
| File Date: 06-Aug-2004 | File Size: 215854 |
|
|
File URL: |
Driver Support File(s)
| | | | | |
| File Name: SCSIHD.DDI | File Version: 3.00 |
| File Date: 22-Oct-2003 | File Size: 29164 |
| Checksum: -1 |
|
File URL: |
| File Name: SCSICD.DDI | File Version: 2.00 |
| File Date: 23-Jul-1998 | File Size: 7309 |
| Checksum: -1 |
|
File URL: |
| File Name: ADPU320.DDI | File Version: 2.0 |
| File Date: 05-Sep-2003 | File Size: 7243 |
|
|
File URL: |
| File Name: NWTAPE.DDI | File Version: 1.00 |
| File Date: 22-Oct-2001 | File Size: 6888 |
|
|
File URL: |
Host Bus Adapter(s)
Product Name | AIC-7901 |
Version: | B0 |
Interface: | Ultra320 SCSI |
Chipset: | AIC-7901 |
BIOS/uEFI: | 4.30 |
Firmware: | N/A |
Channels: | 2 |
Tested Configuration:
CD/DVD: | PLEXTOR
CD-ROM PX-32TS
, Firmware: 1.02
, Interface: Ultra160 SCSI |
Hard Disk Drive: | Maxtor®
ATLAS IV 18 WLS
, Firmware: 0B0B
, Interface: Ultra160 SCSI Maxtor®
ATLAS V 18 WLS
, Firmware: 0230
, Interface: Ultra160 SCSI |
Tape Drive: | Sony
SDX-300C
, Firmware: 0400
, Interface: Ultra160 SCSI |
System: | Dell
PowerEdge 2600 |
Test Kit: | Diskkit 4.04.06 - 05-14-2004 |
Config Notes
- 'Hardware Hot Plug' supported but was not tested.
- Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape, multiple file marks, single set marks, multiple set marks, locate data blocks.
- Tape spanning supported
- Tape device control functions tested and supported: activate/deactivate, mount/dismount, lock/unlock, eject, security erase.
- Tape device I/O functions tested and supported: sequential read/write, single file mark, position media, space data blocks, write protect, reset end of tape, locate data blocks.
|
The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www-03.ibm.com/systems/z/solutions/virtualization/kvm
|