ETERNUS DX80 SAS
Storage Area Network (SAN) Device
Fujitsu
03 Mar 2010
131400

YES CERTIFIED with the following products:
Operating Systems:
  SUSE® LINUX Enterprise Server 11 for AMD64® & Intel® EM64T® with XEN

Product Description
With three different base models, ETERNUS DX80 entry level disk storage systems can either connect to hosts via Fibre Channel (with 8 Gbit/s performance option), iSCSI or SAS. They are easy to install, configure, operate and maintain, integrating well with host operating systems, servers, network infrastructures and backup solutions. Different drive types can be mixed and matched, secured by the relevant monitored RAID levels (0, 1, 1+0, 5, 5+0 and 6) and features to ensure data integrity. Administrators can dynamically move data, spin disks down to save energy or encrypt data to prevent unauthorized access. In the event of power outages, the content of the cache is secured to flash memory. A backup copy is always at hand via snapshots and clones. For more information refer to http://ts.fujitsu.com/products/storage/index.html

Primary Driver File(s):
File Name: mptscsih.koFile Version: 4.00.43.00su
File Date: 28-Feb-2009File Size: 58424
Checksum: fe857c974c5cb730b818cf9bd3b89b9a
File URL:
File Name: mptbase.koFile Version: 4.00.43.00su
File Date: 28-Feb-2009File Size: 139112
Checksum: b847eca36ca00892f1b1d29cfae77c40
File URL:
File Name: scsi_transport_sas.koFile Version: 4.00.43.00su
File Date: 28-Feb-2009File Size: 56928
Checksum: eb5c4ce42baaff7deb3f63592313146c
File URL:
File Name: mptsas.koFile Version: -1
File Date: 28-Feb-2009File Size: 89744
Checksum: 65d34d5b30f4572b988ebc8df936d5e6
File URL:

Driver Support File(s)

Storage Area Network
Product NameETERNUS DX80 SAS
Interface:Serial SCSI (SAS)
Firmware:V10L31
Capacity:120 TB

Tested Configuration:
Host Bus Adapter:2 LSI Logic®  LSI SAS3442E-R , Interface: Serial SCSI (SAS)
System:Fujitsu  PRIMERGY® RX300 S4
Test Kit:DiskKit 5.01.37 - 2009-10-28

Config Notes


The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
FTS TSP ST
Heinz-Nixdorf-Ring 1
Paderborn   33106
GERMANY