ETERNUS DX60 FC
Storage Area Network (SAN) Device
Fujitsu
28 Sep 2009
129258

YES CERTIFIED with the following products:
Operating Systems:
  SUSE® LINUX Enterprise Server 11 for AMD64® & Intel® EM64T® with XEN

Product Description
With three different base models, ETERNUS DX60 entry level disk storage systems can either connect to hosts via Fibre Channel, iSCSI or SAS. They are easy to install, configure, operate and maintain, integrating well with host operating systems, servers, network infrastructures and backup solutions. Different disk types can be mixed and matched, secured by the relevant monitored RAID levels (0, 1, 5, 1+0, 5+0 and 6) and features to ensure data integrity. Administrators can dynamically move data, spin disks down to save energy or encrypt disks to prevent unauthorized access. In the event of power outages, the content of the cache is secured to flash memory. A backup copy is always at hand via snapshots and clones. For more information refer to http://ts.fujitsu.com/products/storage/index.html

Primary Driver File(s):
File Name: lpfc.koFile Version: -1
File Date: 28-Feb-2009File Size: 576368
Checksum: 9fd71327043fc20fb1c061a36a74f86c
File URL:

Driver Support File(s)

Storage Area Network
Product NameETERNUS DX60 FC
Interface:FibreChannel
Firmware:V10L11
Capacity:24 TB

Tested Configuration:
Switching System:Brocade Communication Systems, Inc.  Silkworm 200E
Host Bus Adapter:Emulex Corporation  LPe11002 Dual Channel PCI-e 4Gb/s Fibre Channel , Interface: FibreChannel
System:Fujitsu  PRIMERGY® RX300 S4
Test Kit:DiskKit 5.01.29 - 2009-04-01

Config Notes
The system has successfully proven compatibility with the native MPIO solution of SUSE® LINUX Enterprise Server 11 for AMD64® & Intel® EM64T® with XEN.


The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
FTS TSP ST
Heinz-Nixdorf-Ring 1
Paderborn   33106
GERMANY