PRIMERGY® TX300 S3
Network Server
Fujitsu
21 Jul 2009
126324

YES CERTIFIED with the following products:
Operating Systems:
  Open Enterprise Server     Support Pack 2 for Open Enterprise Server
  NetWare® 6.5     Support Pack 6 for NetWare® 6.5

Other Products:
  eDirectory™ 8.7    Novell® iManager 2.6 
  Novell iPrint 5.0    Novell iFolder® 2.1 
  GroupWise® 7    Apache2 Web Server 2.0 


Product Description
Are you looking for business continuity, especially for your core business applications? Our TX300 servers provide peace of mind when choosing a suitable server platform, because their set of integrated redundancy and hot-plug features assures continuous operation of the platform and thus high application reliability. It is offering the breakthrough performance features of leading edge Intel® Dual-/Quad-Core Xeon® CPUs embedded in a powerful design with an 8-port SAS controller and fast PCIe links and PCI-X busses. Continuity is assured with the hot-plug power supply, hot-plug PCIe, hot-plug redundant fans, RAID 5 embedded and redundant dual LAN features. For your high capacity needs, PRIMERGY TX300 S3 provides 2 memory banks with 2 branches each for memory mirroring with up to 32 GB PC2-5300F (667 MHz) RAM memory for enhancing data transfer throughput. And the system only needs a few additional options to meet the highest demands, such as clustering or disaster-tolerant setup. For business-critical remote sites, the PRIMERGY TX300 S3 is the right platform. For more detailed information please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=3a415401-73fa-4cec-b7b5-94fadb61adfd

Tested Configuration:
Computer Type:Tower
Mother Board Revision:D2129
BIOS:PhoenixBIOS 4.06 Rev. 1.07.2129
CPU:2 Intel®  Dual-Core Xeon® Processor 5160 3.00 GHz
RAM:8 GB
Bus Type:Parallel Port
2 Serial
3 USB Ports
2 64-bit/133MHz PCI-X
2 PCI Express X4
PCI Express X8
Video Adapter:Matrox®  MGA G200e
Host Bus Adapter:Adaptec®  ASC-29160 Ultra160 SCSI Card , SCSI
Intel®  Integrated 6321ESB ICH , IDE
LSI Logic®  LSISAS 1068 , Serial SCSI (SAS)
Hard Disk Drive:3 Seagate®  ST373454SS Cheetah 15.4-SAS , Serial SCSI (SAS)
CD/DVD:LG  GCC-4244N , IDE
Floppy Type:1.44
Test Kit:System Certification Kit 6.0.16

Product File Specifications
PSM Driver:
File Name: ACPIDRV.PSMFile Version: 1.5
File Date: 18-Aug-2006File Size: 38154
Checksum: 1.5
File URL:

Config Notes
This bulletin was released for changing vendor to Fujitsu. Please note that for full support on the listed OS release a special support contract may be necessary. The system is fully supported on the most current service pack release.

Referenced Bulletins
88847

Adapters and Drivers
Intel®  Intel® PRO/1000 MT Server Adapter
Driver Type: LAN DriverFile Name: E1000.LAN
File Date: 22-Dec-2005File Size: 141844

2 Broadcom®  Broadcom NetXtreme Gigabit Ethernet Adapter
Driver Type: LAN DriverFile Name: B57.LAN
File Date: 30-Jun-2006File Size: 186163
Checksum:

Adaptec®  ASC-29160 Ultra160 SCSI Card
Driver Type: HBA DriverFile Name: ADPT160M.HAM
File Date: 17-Nov-2005File Size: 159155
Checksum: -1

Intel®  Integrated 6321ESB ICH
Driver Type: HBA DriverFile Name: IDEATA.HAM
File Date: 06-Jun-2006File Size: 104109
Checksum:

LSI Logic®  LSISAS 1068
Driver Type: HBA DriverFile Name: MEGA_SAS.HAM
File Date: 08-Sep-2006File Size: 28828
Checksum: -1

Matrox®  MGA G200e

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually YES CERTIFIED components may be exchanged for other YES CERTIFIED components. For more information on swapping YES CERTIFIED components, please access the following web page:

http://developer.novell.com/devres/system/policy/exchange.htm

For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
TSP x86 E QA 1
Bürgermeister-Ulrich-Strasse 100
Augsburg   86199
GERMANY
Voice: +49 (0)821 804-2987
Website: http://ts.fujitsu.com/products/standard_servers/index.html