PRIMERGY® TX300 S4
Network Server
Fujitsu
21 Jul 2009
126286

YES CERTIFIED with the following products:
Operating Systems:
  SUSE® LINUX Enterprise Server 10 for AMD64® & Intel® EM64T®     Service Pack 1 for SUSE® SLES 10

Other Products:
  Novell® Open Enterprise Server 2 


Product Description
Are you looking for business continuity, especially for your core business applications? Our TX300 servers provide peace of mind when choosing a suitable server platform, because their set of integrated redundancy and hot-plug features assures continuous operation of the platform and thus high application reliability. It is offering the breakthrough performance features of leading edge Intel® Dual- /Quad-Core Xeon® CPUs embedded in a powerful design with an 8-port SAS controller and fast PCIe links and PCI-X busses. Continuity is assured with the optional hot-plug power supply, hot-plug redundant fans, modular RAID and redundant dual LAN features. For your high capacity needs, PRIMERGY TX300 S4 provides up to 2 memory boards with 16 DIMM slots for hot-spare or memory mirroring with up to 64 GB PC2-5300F (667 MHz) RAM memory for enhancing data transfer throughput. And the system only needs a few additional options to meet the highest demands, such as clustering or disaster-tolerant setup. For business-critical remote sites, the PRIMERGY TX300 S4 is the right platform. For more detailed information please refer to the data sheet at: http://docs.ts.fujitsu.com/dl.aspx?id=1ee2d2d4-7ab5-4b60-80cf-d8a02299359a

Tested Configuration:
Computer Type:Tower
Mother Board Revision:D2529
BIOS:4.06 Rev. 1.00.2529
CPU:2 Intel®  Quad-Core Xeon® Processor X5460 3.16 GHz
RAM:8 GB
Bus Type:Serial
64-bit/133MHz PCI-X
4 PCI Express X4
2 PCI Express X8
4 USB Ports
Video Adapter:Matrox®  MGA G200e
Host Bus Adapter:LSI Logic®  LSISAS1078E 8-port SAS Controller , Serial SCSI (SAS)
Intel®  Integrated 6321ESB ICH , Serial ATA (SATA)
Hard Disk Drive:3 Seagate®  ST373454SS Cheetah 15.4-SAS , Serial SCSI (SAS)
CD/DVD:LG  GSA-T30N , Serial ATA (SATA)
Floppy Type:1.44
Test Kit:System Certification Kit 6.1.0-0.28


Config Notes
This bulletin was released for changing vendor to Fujitsu. Please note that for full support on the listed OS release a special support contract may be necessary. The system is fully supported on the most current service pack release.

Referenced Bulletins
95617

Adapters and Drivers
2 Broadcom®  Integrated BCM5708C NetXtreme II GbE controller
Driver Type: LAN DriverFile Name: bnx2.ko
File Date: 18-May-2007File Size: 164232
Checksum: 90377266148d62053daf40e47504591a

LSI Logic®  LSISAS1078E 8-port SAS Controller
Driver Type: HBA DriverFile Name: megaraid_sas.ko
File Date: 18-Jun-2007File Size: 61228
Checksum: 20dd6733dcb2485d3ba9966138dcc4d6

Intel®  Integrated 6321ESB ICH
Driver Type: HBA DriverFile Name: ata_piix.ko
File Date: 18-May-2007File Size: 43712
Checksum: 82982ea1bf655caa885b0fc6ed088d45

Matrox®  MGA G200e
Driver Type: Video DriverFile Name: mga_dri.so
File Date: 21-Sep-2006File Size: 2225396
Checksum: f7cfd4651f6df6f658d7af87cd89120d


The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually YES CERTIFIED components may be exchanged for other YES CERTIFIED components. For more information on swapping YES CERTIFIED components, please access the following web page:

http://developer.novell.com/devres/system/policy/exchange.htm

For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
TSP x86 E QA 1
Bürgermeister-Ulrich-Strasse 100
Augsburg   86199
GERMANY
Voice: +49 (0)821 804-2987
Website: http://ts.fujitsu.com/products/standard_servers/index.html