PRIMERGY® BX620 S4
Network Server
Fujitsu Siemens Computers
29 May 2008
101677

YES CERTIFIED with the following products:
Operating Systems:
  NetWare® 6.5     Support Pack 7 for NetWare® 6.5

Other Products:
  Novell® Open Enterprise Server 2 


Product Description
The PRIMERGY BX620 S4 succeeding the BX620 S3 server blade provides all of it's predecessor's future oriented technologies and even more: Latest Dual- and Quad-Core processors from Intel® (up to 3 GHz), memory (FBD, extended mirroring), storage (modular storage controller configuration) and 2.5 inch SAS or SATA hard disk drives. Very impressive performance and flexibility enhancements are granted through six on-board Gigabit Ethernet interfaces, operating within a PRIMERGY BX600 S3 blade server chassis in combination with two Gigabit Ethernet switch blades offering 2x 30 downlinks plus 2x 12 uplinks for optimum LAN connectivity. Due to its backward compatibility, the PRIMERGY BX620 S4 may be installed in the BX600 S2 chassis as well. Based on those capabilities the PRIMERGY BX620 S4 enables customers to run larger and more (with virtualization based on VMware or Xen) applications compared to all other existing PRIMERGY BX600 Dual Server Blades. With its new modular design for different requirements, the customer can create specific configurations in combination with SAS or SATA hard disks to meet different usage scenarios. For example a customer can create a low cost platform with SATA hard disk and the SATA storage module or featured platform with SAS hard disks and a SAS storage module, which can take up a PCI Express card in addition. For high demands regarding security a SAS storage module with RAID1 and Cache/iTBBU is offered. All those configurations can be established very easy in the factory or in the field, because the different storage modules come with an intelligent mounting cage for the server blade front. For more details please refer to the data sheet at: http://vilpublic.fujitsu-siemens.com/vil/pc/vil/primergy/model_line_bladeserver/ds_prim_bx600-s3_ecosystem.pdf.

Tested Configuration:
Computer Type:Blade Module
Mother Board Revision:D2571
BIOS:Rev. 3A28.2571
CPU:2 Intel®  Quad-Core Xeon® Processor E5405 2.0 GHz
RAM:8 GB
Bus Type:PCI Express X4
2 USB Ports
Video Adapter:ATI®  ES1000
Host Bus Adapter:FSC  BX600-FC42E , FibreChannel
LSI Logic®  LSISAS 1068 , Serial SCSI (SAS)
Hard Disk Drive:2 Fujitsu  MAY2073RC , Serial SCSI (SAS)
Floppy Type:NONE
Test Kit:System Certification Kit 6.1.0-0.28

Product File Specifications
PSM Driver:
File Name: ACPIDRV.PSMFile Version: 1.5
File Date: 16-Jan-2007File Size: 38029
Checksum: 1.5
File URL:

Config Notes


Adapters and Drivers
6 Broadcom®  Broadcom NetXtreme Gigabit Ethernet Adapter
Driver Type: LAN DriverFile Name: B57.LAN
File Date: 01-Feb-2007File Size: 192464
Checksum:

FSC  BX600-FC42E
Driver Type: HBA DriverFile Name: LPFC.HAM
File Date: 16-Jul-2007File Size: 109462
Checksum: -1

LSI Logic®  LSISAS 1068
Driver Type: HBA DriverFile Name: LSIMPTNW.HAM
File Date: 20-Sep-2006File Size: 244655
Checksum:

ATI®  ES1000

The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. Components including LAN adapters, host bus adapters and other individually YES CERTIFIED components may be exchanged for other YES CERTIFIED components. For more information on swapping YES CERTIFIED components, please access the following web page:

http://developer.novell.com/devres/system/policy/exchange.htm

For more information regarding the specific test configuration, please contact:

Fujitsu Siemens Computers
FSC EP PS QA1
Buergermeister-Ulrich-Str. 100
Augsburg   D-86199
GERMANY
Website: Presales Hotline: PRIMERGY-PM@fujitsu-siemens.com