ServeRAID-MR10i
Device Driver / Host Bus Adapter
IBM
13 Feb 2008
100342

YES CERTIFIED with the following products:
Operating Systems:
  NetWare® 6.5     Support Pack 7 for NetWare® 6.5

Product Description
ServeRAID-MR10i SAS/SATA controller is a low-cost PCIe RAID controller for Internal System RAID 0, 1, 10, 5, 50, 6, 60. This full height, half length adapter utilizes an LSI 1078 controller with an x8 PCI Express host interface and eight internal SAS/SATA II 3 Gb/s ports. MegaRAID Storage Manager (MSM), included with ServeRAID-MR10i, is a robust RAID management, configuration, and reporting application.

Primary Driver File(s):
File Name: MEGA_SAS.HAMFile Version: 1.06e
File Date: 23-Aug-2007File Size: 31865
Checksum: -1
File URL:
File Name: SCSIHD.CDMFile Version: 3.03h
File Date: 09-Jan-2007File Size: 34414
Checksum: -1
File URL:

Driver Support File(s)
File Name: SCSIHD.DDIFile Version: 3.08
File Date: 16-Jan-2007File Size: 37658
Checksum: -1
File URL:
File Name: MEGA_SAS.DDIFile Version: 1.06.05
File Date: 23-Aug-2007File Size: 13956
Checksum: -1
File URL:

Host Bus Adapter(s)
Product NameServeRAID-MR10i
Version:1
Interface:Serial SCSI (SAS)
RAID Level:5
Bus Type:PCI Express X8
Chipset:LSI
BIOS:NT16
Firmware:8.0.1-0027
Channels:2

Tested Configuration:
CD/DVD:LG  GCC-4244N , Interface: IDE
Hard Disk Drive:2 IBM  RAID 5 Logical Drive , Firmware: 1 , Interface: Serial SCSI (SAS)
System:IBM  System x3650 (7979-BGx) , Interface: Serial SCSI (SAS) , Bus Type: PCI Express X8 , Memory: 6 GB
Test Kit:Diskkit 4.05.11 - 04-23-2007

Config Notes
Testing was performed in Raid-5 configuration.


The term YES CERTIFIED applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:

IBM
For support regarding this specific configuration, please visit:
www.ibm.com