Samba Printing in an AD Enviroment (SAMBA, PRINT)
This document (7022709) is provided subject to the disclaimer at the end of this document.
Environment
SUSE Linux Enterprise Server 12
Situation
Trying to setup Printer from an AD Print Server does not work. No printers show up. Entering commandline
smbclient -L //192.168.36.61/su-se-42 -U susenet/myprint -m SMB2
Connection to 192.168.36.61 failed (Error NT_STATUS_RESOURCE_NAME_NOT_FOUND)
fails too.
smbclient -L //192.168.36.61/su-se-42 -U susenet/myprint -m SMB2
Connection to 192.168.36.61 failed (Error NT_STATUS_RESOURCE_NAME_NOT_FOUND)
fails too.
Resolution
The AD does not respond to the minimal client protocol offered by the Samba Server. Setting
in
/etc/samba/smb.conf
client min protocol = SMB2
client max protocol = SMB3
resolves the issue.
in
/etc/samba/smb.conf
client min protocol = SMB2
client max protocol = SMB3
resolves the issue.
Additional Information
Information gathered thanks to our customers feedback
Disclaimer
This Support Knowledgebase provides a valuable tool for SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.
- Document ID:7022709
- Creation Date: 07-Mar-2018
- Modified Date:03-Mar-2020
-
- SUSE Linux Enterprise Server
For questions or concerns with the SUSE Knowledgebase please contact: tidfeedback[at]suse.com
