ReaR rescue environment fails to load on Blade Hardware
This document (7008029) is provided subject to the disclaimer at the end of this document.
SUSE Linux Enterprise High Availability Extension SP1
[ 61.403784] Loading bnx2x-e1h-22.214.171.124.fw
[ 121.382044] Can't load firmware file bnx2x-e1h-126.96.36.199.fw
ReaR 1.7 was not designed to work on hardware that requires firmware loading such as blades, but an enhancement request has been submitted and firmware loading should be supported in the next version of ReaR included in SLE HA SP2.
1- Install ReaR on SLES 11 SP1 on blade hardware (e.g ProLiant BL460c G6)
2- Configure required settings in /etc/rear/local.conf (e.g location of back up (nfs) and output type (iso))
3- Run command #rear mkbackup
4- Copy the ReaR.iso to cd/dvd on the server so it boots from it
5- Reboot the server
6- At rear screen with prompt "boot" type "rear"to enter rear image.
ReaR fails to load firmware at this point.
This Support Knowledgebase provides a valuable tool for NetIQ/Novell/SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.
- Document ID:7008029
- Creation Date:02-MAR-11
- Modified Date:27-APR-12
- SUSESUSE Linux Enterprise High Availability ExtensionSUSE Linux Enterprise Server
Did this document solve your problem? Provide Feedback< Back to Support Search