Disabling SNMPv1 and SNMPv2c leaving SNMPv3 enabled
This document (7017266) is provided subject to the disclaimer at the end of this document.
SUSE Linux Enterprise Server 11
SUSE Linux Enterprise Server 12
leaving SNMPv3 enabled.
access from the localhost.
It does so through the following configuration line in /etc/snmp/snmpd.conf
rocommunity public 127.0.0.1
Commenting out this line or removing it altogether will disable this access.
Restart the snmpd daemon.
# /etc/init.d/snmpd restart
After starting snmpd, you can verify that the SNMPv1 and SNMPv2c access
is disabled using the snmpwalk utility:
# snmpwalk -v1 -c public localhost Timeout: No Response from localhost # snmpwalk -v2c -c public localhost Timeout: No Response from localhost
This Support Knowledgebase provides a valuable tool for SUSE customers and parties interested in our products and solutions to acquire information, ideas and learn from one another. Materials are provided for informational, personal or non-commercial use within your organization and are presented "AS IS" WITHOUT WARRANTY OF ANY KIND.
- Document ID:7017266
- Creation Date: 17-Feb-2016
- Modified Date:03-Mar-2020
- SUSE Linux Enterprise Server
For questions or concerns with the SUSE Knowledgebase please contact: firstname.lastname@example.org