|
 | R2250 G6
Network Server
Cisco Systems, Inc. | 13 Aug 2025
154241 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 10 |
Product Description
Please visit the website https://enterprise.zte.com.cn/product-detail.html?id=311 for more information about this product.
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 55da0100 |
| BIOS/uEFI: | UEFI: 24.25.02.20 (06/11/2025) |
| CPU: | 2 AMD
EPYC™ 7601 2.20 GHz |
| RAM: | 512 GB |
| Video Adapter: | Matrox®
G200eW3 |
| Host Bus Adapter: | AMD
EPYC™ 7601 Integrated FCH SATA Controller
, Serial ATA (SATA) Dell
PowerEdge RAID Controller H730P
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Toshiba
Enterprise Capacity HDD, 2 TB, SAS (MG04SCA20ENY)
, Serial SCSI (SAS) |
| CD/DVD: | HP
DVD-ROM DU90N
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 9.2.0-150600.117.4 |
Config Notes
- Graphic Resolution: The system install sets the graphic resolution to 800x600; this can be changed by hand after the install.
- Install: The SLES 11 SP1 install was performed using the internal DVD optical drive. PXE booting requires a "?device=eth0" added to the boot process.
- KVM Guests: The SLES 10 SP4 guest was configured with virtual e1000 NIC.
- KVM Guests: Current kernel maintenance updates were installed on the SLES 11 SP1 KVM guests in order to provide updated virtio drivers.
|
Referenced Bulletins
137277
Adapters and Drivers
| | | | | |
| Matrox®
G200eW3 |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 14-Aug-2018 | Driver Size: 105288 |
| | Checksum: 71e6052f01875b97a30bd891731aa586 |
|
| Intel
Gigabit 4P I350 bNDC (Quad Port) |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 14-Aug-2018 | Driver Size: 489496 |
| | Checksum: 465b1b290f2344777326ee47c5b22078 |
| | Driver Version: 5.4.0-k |
|
| AMD
EPYC™ 7601 Integrated FCH SATA Controller |
| | Driver Type: HBA Driver | Driver Name: ahci.ko |
| | Driver Date: 14-Aug-2018 | Driver Size: 79168 |
| | Checksum: df863c78eae4eccdb697f5f71aa8bf85 |
| | Driver Version: 3.0 |
|
| Dell
PowerEdge RAID Controller H730P |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 14-Aug-2018 | Driver Size: 288936 |
| | Checksum: cfc941ec9299c2ac9c5d7ec304c7531c |
| | Driver Version: 07.704.04.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Cisco Systems, Inc.
170 West Tasman Dr.
San Jose
, CA
95134
Voice: (408) 526-4000
Toll Free: (800) 553-NETS or (800) 553-6387
Website: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html
|