|
 | UCSC-C225-M8S
Network Server
Fujitsu | 20 Mar 2025
153832 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 with KVM Service Pack 5 for SUSE® SLES 15 |
Other Products:
| SUSE® Linux Enterprise Micro 5.5 |
Product Description
Cisco Rack mount server
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 74-132393-01 |
| BIOS/uEFI: | UEFI: C225M8.4.3.5d.0.0206250854 (02/06/2025) |
| CPU: | AMD
Athlon™ II X2 245 Processor |
| RAM: | 128 GB |
| Video Adapter: | ASPEED
AST1300 |
| Host Bus Adapter: | Micron Technology, Inc.
9100 SSD Non-Volatile Memory Controller |
| Hard Disk Drive: | HPE
1.6TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static Multi Vendor SSD |
| Test Kit: | System Certification Kit 9.1.0-150500.110.2 |
Config Notes
- Install: PXE Boot, OS Installed via Network.
- PCI Network Pass-Through: System was tested using PCI pass-through where one of the host network adapters was given to the SLES 12 x86-64 guest. The Intel® Ethernet Controller I350-AM2 was used during this testing.
|
Adapters and Drivers
| | | | | |
| ASPEED
AST1300 |
| | Driver Type: Video Driver | Driver Name: ast.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 45022 |
| | Checksum: dfcaf4dfbfa5502eaf745f7b1a86eddd |
|
| Cisco
UCS VIC 1340 (NIC) |
| | Driver Type: LAN Driver | Driver Name: enic.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 77073 |
| | Checksum: b51062f2d769ccd848ab3cc8428894b0 |
|
| Micron Technology, Inc.
9100 SSD Non-Volatile Memory Controller |
| | Driver Type: HBA Driver | Driver Name: nvme.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 43816 |
| | Checksum: 1587d87aaca9df53155539d7585787a3 |
| | Driver Version: 1.0 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
4-1-1 Kamikodanaka, Nakahara-ku,
Kawasaki-shi, Kanagawa 211-8588
JAPAN
|