|
 | UCSC-C220-M7N
Network Server
IBM | 02 Dec 2024
153664 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 with XEN |
Product Description
Cisco Rack-Mount Server
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 74-127171-01 |
| BIOS/uEFI: | UEFI: C220M7.4.3.4b.0.0731240927 (07/31/2024) |
| CPU: | 2 Intel
Xeon® Platinum 8490H Processor 1.90 GHz |
| RAM: | 256 GB |
| Video Adapter: | ASPEED
AST1300 |
| Host Bus Adapter: | Micron Technology, Inc.
9100 SSD Non-Volatile Memory Controller |
| Hard Disk Drive: | HPE
1.6TB NVMe Gen4 Mainstream Performance Mixed Use SFF BC U.3 Static Multi Vendor SSD |
| Test Kit: | System Certification Kit 9.0.0-150500.99.1 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
- The Mellanox Integrated MT27710 ConnectX®-4 Lx EN is configured with one 25GbE port and one 10GbE port.
|
Adapters and Drivers
| | | | | |
| ASPEED
AST1300 |
| | Driver Type: Video Driver | Driver Name: ast.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 45022 |
| | Checksum: dfcaf4dfbfa5502eaf745f7b1a86eddd |
|
| Cisco
USC VIC 1455 |
| | Driver Type: LAN Driver | Driver Name: enic.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 77073 |
| | Checksum: b51062f2d769ccd848ab3cc8428894b0 |
|
| Micron Technology, Inc.
9100 SSD Non-Volatile Memory Controller |
| | Driver Type: HBA Driver | Driver Name: nvme.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 43816 |
| | Checksum: 1587d87aaca9df53155539d7585787a3 |
| | Driver Version: 1.0 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|