|
 | UCSX-210C-M7
Network Server
Kyocera Mita Corporation | 02 Dec 2024
153648 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for x86 Service Pack 2 for SUSE® SLES 10 |
Product Description
Cisco Blade server
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 73-102386-05 |
| BIOS/uEFI: | UEFI: X210M7.4.3.4a.0.0513242027 (05/13/2024) |
| CPU: | 2 Intel
Xeon® Platinum 8460Y+ Processor 2.00 GHz |
| RAM: | 256 GB |
| Video Adapter: | ASPEED
AST1300 |
| Host Bus Adapter: | Cisco
12G SAS Modular Raid Controller |
| Hard Disk Drive: | Seagate®
ST600MP0005 Enterprise Performance 15K.5 12Gbps SAS 512N 600GB HDD |
| Test Kit: | System Certification Kit 9.0.0-150500.103.1 |
Config Notes
- Install: System installed using PXE network install; the OS was installed using the UEFI boot loader and system configuration. Disk configuration: RAID 0.
- SR-IOV: System was tested using SR-IOV where a virtual network adapter was given to a SLES 15 SP3 guest. One of the Intel X550-T2 Dual Port 10GBase-T adapters was used in this testing.
|
Referenced Bulletins
150646
Adapters and Drivers
| | | | | |
| ASPEED
AST1300 |
| | Driver Type: Video Driver | Driver Name: ast.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 45022 |
| | Checksum: dfcaf4dfbfa5502eaf745f7b1a86eddd |
|
| Cisco
UCS VIC 1340 (NIC) |
| | Driver Type: LAN Driver | Driver Name: enic.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 77073 |
| | Checksum: b51062f2d769ccd848ab3cc8428894b0 |
|
| Cisco
12G SAS Modular Raid Controller |
| | Driver Type: HBA Driver | Driver Name: ahci.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 30469 |
| | Checksum: 0363a3c5a4a4f25aeed47f287c717d2d |
| | Driver Version: 3.0 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Kyocera Mita Corporation
2-28, 1-Chome, Tamatsukuri, Chuo-ku
Osaka
540-8585
JAPAN
Voice: +81-6-6764-3555
Fax: +81-6-6764-3980
Website: www.kyoceramita.com
|