|
 | UCSX-210C-M7
Network Server
ZTE Corporation | 11 Nov 2024
153613 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 Service Pack 3 for SUSE® SLES 10 |
Product Description
Cisco Blade server
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 73-102386-05 |
| BIOS/uEFI: | UEFI: X210M7.4.3.4a.0.0513242027 (05/13/2024) |
| CPU: | 2 Intel
Xeon® Platinum 8460Y+ Processor 2.00 GHz |
| RAM: | 256 GB |
| Video Adapter: | ASPEED
AST1300 |
| Host Bus Adapter: | Cisco
12G SAS Modular Raid Controller |
| Hard Disk Drive: | Seagate®
ST600MP0005 Enterprise Performance 15K.5 12Gbps SAS 512N 600GB HDD |
| Test Kit: | System Certification Kit 9.0.0-150500.103.1 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
- Persistent Memory: The Persistent Memory in the system was configured in Memory Mode only.
- SR-IOV: System was tested using SR-IOV where a virtual network adapter was given to a SLES 15 SP5 guest. One of the integrated Intel Ethernet Connection X722 (Quad-Port) for 1GbE adapters was used in this testing.
|
Referenced Bulletins
152248
Adapters and Drivers
| | | | | |
| ASPEED
AST1300 |
| | Driver Type: Video Driver | Driver Name: ast.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 45022 |
| | Checksum: dfcaf4dfbfa5502eaf745f7b1a86eddd |
|
| Cisco
UCS VIC 1340 (NIC) |
| | Driver Type: LAN Driver | Driver Name: enic.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 77073 |
| | Checksum: b51062f2d769ccd848ab3cc8428894b0 |
|
| Cisco
12G SAS Modular Raid Controller |
| | Driver Type: HBA Driver | Driver Name: ahci.ko.zst |
| | Driver Date: 03-May-2024 | Driver Size: 30469 |
| | Checksum: 0363a3c5a4a4f25aeed47f287c717d2d |
| | Driver Version: 3.0 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
ZTE Corporation
ZTE Plaza
Hi-Tech Road South
Hi-Tech Industrial Park, Nanshan District
Shenzhen
518057
CHINA
Voice: +86-755-26770000
|