|
 | IBM Power S1012 (9028-21B)
Network Server
IBM | 21 Oct 2024
153579 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server for IBM Power 15 Service Pack 6 for SUSE® SLES 15 |
Product Description
The Power S1012 (9028-21B) server is a one-socket, half-wide offered in a Rack or Tower/Deskside form factor that provides low cost-optmized system. The Power S1012 server brings a secure environment that balances mission-critical traditional workloads.
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 1 |
| BIOS/uEFI: | 1 |
| CPU: | IBM
Power10 3.9 GHz |
| RAM: | 256 GB |
| Host Bus Adapter: | Samsung®
Non-Volatile memory controller (NVMe) for Samsung devices |
| Hard Disk Drive: | Samsung®
800GB NVMe Gen4 U.2 SSD III |
| Test Kit: | System Certification Kit 9.0.0-150500.103.1 |
Config Notes
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration. Disk configuration: HDD RAID 1, M.2 boot disk RAID 0.
- SR-IOV: System was tested using SR-IOV where a virtual network adapter was given to the SLES 15 SP3 FV guest. One of the Intel Integrated Ethernet Connection X722 (Dual-Port) for 1GbE adapters was used in this testing.
|
Referenced Bulletins
150653
Adapters and Drivers
| | | | | |
| Samsung®
Non-Volatile memory controller (NVMe) for Samsung devices |
| | Driver Type: HBA Driver | Driver Name: nvme.ko.zst |
| | Driver Date: 12-Jun-2024 | Driver Size: 40620 |
| |
|
| Broadcom®
BCM5719 X4 PCI Express® Quad-Port Gigabit Ethernet Controller |
| | Driver Type: LAN Driver | Driver Name: tg3.ko.zst |
| | Driver Date: 12-Jun-2024 | Driver Size: 118195 |
| |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|