|
 | PRIMERGY RX1440 M2
Network Server
Fujitsu | 15 Oct 2024
153545 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for x86 Service Pack 2 for SUSE® SLES 11 |
Virtual Machines (Guests OS):
| 2
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
|
SP:
Service Pack 6 for SUSE SLES 15 |
Arch:
64 |
Mode:
Paravirtualized |
|
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
|
SP:
Service Pack 6 for SUSE SLES 15 |
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
For more information, please visit www.fujitsu.com.
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | S26361-D4130-A100 WGS01 GS52 |
| BIOS/uEFI: | UEFI: V5.0.0.35 R9.72.0 for D4130-A1x (08/08/2024) |
| CPU: | AMD
EPYC™ 9845 |
| RAM: | 1.5 TB |
| Video Adapter: | ASPEED
AST2600 |
| Host Bus Adapter: | KIOXIA
Non-Volatile memory controller (NVMe) for KIOXIA devices AMD
EPYC™ 9005 Series Integrated FCH SATA Controller |
| Hard Disk Drive: | KIOXIA
CM6-V Series, NVMe SSD, PCIe 4.0, 2.5-inch 6.4 TB (KCM61VUL6T40) KIOXIA
CM6-R Series, NVMe SSD, PCIe 4.0, 2.5-inch 7.68 TB (KCM61RUL7T68) Micron
5400 PRO, M.2, SATA, 960GB (MTFDDAV960TGA) |
| CD/DVD: | HLDS
Super Multi DVD-Writer (HL-DT-ST DVDRAM GUD1N) |
| Test Kit: | System Certification Kit 9.0.0-150500.103.1 |
Config Notes
- Install: PXE boot, OS installed via network.
- PCI Network Pass-Through: System was tested using PCI pass-through where one of the host network adapters was given to one of the SLES 12 x86-64 guest. The Intel® I210-AT network adapter was used during this testing.
|
Adapters and Drivers
| | | | | |
| ASPEED
AST2600 |
| | Driver Type: Video Driver | Driver Name: ast.ko.zst |
| | Driver Date: 19-May-2024 | Driver Size: 44985 |
| | Checksum: 5eee30b9122c2e3a506f977d481f770f |
|
| Intel
Ethernet Controller I210-IT |
| | Driver Type: LAN Driver | Driver Name: igb.ko.zst |
| | Driver Date: 18-May-2024 | Driver Size: 178098 |
| | Checksum: 0e42e463dfa192f6e23cc4f230348faa |
|
| Intel
Ethernet Network Adapter X710-T2L for OCP 3.0 (Dual Port) |
| | Driver Type: LAN Driver | Driver Name: i40e.ko.zst |
| | Driver Date: 19-May-2024 | Driver Size: 376881 |
| | Checksum: 31175516b36981d0ba0bebf75a4555c2 |
|
| KIOXIA
Non-Volatile memory controller (NVMe) for KIOXIA devices |
| | Driver Type: HBA Driver | Driver Name: nvme.ko.zst |
| | Driver Date: 18-May-2024 | Driver Size: 43730 |
| | Checksum: 898b51a6c78084111582180424313417 |
| | Driver Version: 1.0 |
|
| AMD
EPYC™ 9005 Series Integrated FCH SATA Controller |
| | Driver Type: HBA Driver | Driver Name: ahci.ko.zst |
| | Driver Date: 18-May-2024 | Driver Size: 25031 |
| | Checksum: 131a67820deb83832d5bc44d565e8602 |
| | Driver Version: 3.0 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
TSP CLI E SW OSE
Bürgermeister-Ulrich-Strasse 100
Augsburg
86199
GERMANY
Voice: +49 (0)821 804-3321
|