|
 | UCSX-210C-M7
Network Server
FSAS Technologies Inc. | 22 Feb 2024
153145 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 16.0 for AMD64 & Intel64 |
Other Products:
Product Description
Cisco Blade server
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 73-102695-06 |
| BIOS/uEFI: | UEFI: X210M7.4.3.3a.0.0118241337 (01/18/2024) |
| CPU: | 2 Intel
Xeon Platinum 8450H Processor 2.00 GHz |
| RAM: | 768 GB |
| Video Adapter: | Matrox Graphics Inc.
G200 SE A (PCI) |
| Host Bus Adapter: | Micron Technology, Inc.
9100 SSD Non-Volatile Memory Controller |
| Hard Disk Drive: | Western Digital
Ultrastar DC SN640, NVMe |
| Test Kit: | System Certification Kit 8.8.1-150400.88.1 |
Config Notes
- Install: System installed via virtual media using Lenovo XClarity™ Controller; the OS was installed using the UEFI boot loader and system configuration; using UEFI Secure Boot.
- SR-IOV/PCI Pass-through: Current system configuration does not support network SR-IOV or network PCI pass-through.
|
Referenced Bulletins
154563
Adapters and Drivers
| | | | | |
| Cisco
UCS VIC 1340 (NIC) |
| | Driver Type: LAN Driver | Driver Name: enic.ko.zst |
| | Driver Date: 05-Dec-2023 | Driver Size: 98047 |
| | Checksum: b57886d1fd8299c3ad8251766f3cf915 |
|
| Micron Technology, Inc.
9100 SSD Non-Volatile Memory Controller |
| | Driver Type: HBA Driver | Driver Name: nvme.ko.zst |
| | Driver Date: 05-Dec-2023 | Driver Size: 39319 |
| | Checksum: 88c84c730c797489f2ab6f50e566ce4d |
| | Driver Version: 1.0 |
|
| Matrox Graphics Inc.
G200 SE A (PCI) |
| | Driver Type: Video Driver | Driver Name: mgag200.ko.zst |
| | Driver Date: 13-Nov-2023 | Driver Size: 36609 |
| | Checksum: 4bc24d9b3f213042932cbf912c4cff25 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
FSAS Technologies Inc.
13-2 Frontier Musashikosugi, Nakamaruko, Nakahara-ku
Kawasaki City
211-0012
JAPAN
Voice: 044-754-2453
Website: https://www.fsastech.com/
|