|
 | Hitachi Advanced Server HA840 G3
Network Server
Fujitsu | 23 Aug 2023
152623 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 with KVM Service Pack 4 for SUSE® SLES 15 |
Other Products:
| SUSE® Linux Enterprise Micro 5.3 | SUSE® Linux Enterprise Micro 5.4 |
Product Description
for more information please visit, https://www.hitachivantara.com/
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | Gen 11 |
| BIOS/uEFI: | UEFI: 1.36 (05/26/2023) |
| CPU: | 4 Intel
Xeon® Platinum 8490H Processor 1.90 GHz |
| RAM: | 16 TB |
| Ports and Bus Types: | 5 USB Ports PCI Express X8 PCI Express X16 |
| Video Adapter: | Matrox Graphics Inc.
G200eH3 |
| Host Bus Adapter: | HPE
MR408i-o Gen11 SPDM Storage Controller
, Serial SCSI (SAS) |
| Hard Disk Drive: | 3 HPE
P49045-B21 15.36 TB SAS 24G SSD
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.7.1-52.1 |
Config Notes
- Install: PXE boot, OS installed via network.
|
Referenced Bulletins
149980
Adapters and Drivers
| | | | | |
| Matrox Graphics Inc.
G200eH3 |
| | Driver Type: Video Driver | Driver Name: mgag200.ko.zst |
| | Driver Date: 11-May-2022 | Driver Size: 17999 |
| | Checksum: 70e2e804042165de727265150a5ba2f5 |
|
| HPE
Ethernet 1Gb 4-port Base-T I350-T4 OCP3 Adapter |
| | Driver Type: LAN Driver | Driver Name: igb.ko.zst |
| | Driver Date: 11-May-2022 | Driver Size: 133614 |
| | Checksum: a02abff3db3974186b0bfb2a68639857 |
|
| HPE
MR408i-o Gen11 SPDM Storage Controller |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko.zst |
| | Driver Date: 11-May-2022 | Driver Size: 91281 |
| | Checksum: 73fe8023764e189c76be50188530b557 |
| | Driver Version: 07.719.03.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
4-1-1 Kamikodanaka, Nakahara-ku,
Kawasaki-shi, Kanagawa 211-8588
JAPAN
|