|
 | ProLiant ML110 Gen11(Xeon 6421N, 1.9GHz, 32c)
Network Server
Supermicro Computer | 31 May 2023
152124 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
Virtual Machines (Guests OS):
| 3
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 |
|
SP:
Service Pack 4 for SUSE SLES 15 |
Arch:
64 |
Mode:
Fully Virtualized |
|
Windows Server 2019 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
For more information please visit, https://www.hpe.com/us/en/servers.html
Tested Configuration:
| Computer Type: | Tower |
| Mother Board Revision: | Gen11 |
| BIOS/uEFI: | UEFI: 1.30 (03/01/2023) |
| CPU: | Intel
Xeon® Gold 6421N Processor 1.80 GHz |
| RAM: | 256 GB |
| Ports and Bus Types: | 5 USB Ports 2 PCI Express X16 |
| Video Adapter: | Matrox Graphics Inc.
G200eH3 |
| Host Bus Adapter: | HPE
MR216i-p Gen11 Storage Controller
, Serial SCSI (SAS) |
| Hard Disk Drive: | HPE
6.4TB SAS MU SFF BC MV SSD
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.7.1-52.1 |
Config Notes
- Kdump (SLE15): the crash kernel reserved memory parameters were increased from the default to crashkernel=194M,high crashkernel=72M,low using YaST.
- Install: The SLES 15 install was performed using a virtual DVD device.
- Maintenance update: SLES 15 kernel update 4.12.14-25.22.1.x86_64 is required and was installed during certification testing.
|
Adapters and Drivers
| | | | | |
| Matrox Graphics Inc.
G200eH3 |
| | Driver Type: Video Driver | Driver Name: mgag200.ko.zst |
| | Driver Date: 11-May-2022 | Driver Size: 17999 |
| | Checksum: 70e2e804042165de727265150a5ba2f5 |
|
| HPE
Ethernet 1Gb 4-port Base-T I350-T4 OCP3 Adapter |
| | Driver Type: LAN Driver | Driver Name: igb.ko.zst |
| | Driver Date: 11-May-2022 | Driver Size: 133614 |
| | Checksum: a02abff3db3974186b0bfb2a68639857 |
|
| HPE
MR216i-p Gen11 Storage Controller |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko.zst |
| | Driver Date: 11-May-2022 | Driver Size: 91281 |
| | Checksum: 73fe8023764e189c76be50188530b557 |
| | Driver Version: 07.719.03.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Supermicro Computer
980 Rock Ave.
San Jose
, CA
95131
Website: https://www.supermicro.com/
|