|
| NF5466-M7-A0-R0-00
Network Server
Inspur Corporation | 16 Feb 2023
151927 |
SUSE YES Certified for the following products:
Operating Systems:
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 Service Pack 4 for SUSE® SLES 15 |
Other Products:
SUSE® Linux Enterprise Micro 5.3 |
Product Description
For more detailed info, please visit https://www.inspur.com
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | 1.0 |
BIOS/uEFI: | UEFI: 04.00.00 (01/13/2023) |
CPU: | 2 Intel
Xeon® Platinum 8490H Processor 1.90 GHz |
RAM: | 32 GB |
Video Adapter: | ASPEED
AST2600 |
Host Bus Adapter: | Inspur
MT0808M6R (8GB) RAID Adapter |
Hard Disk Drive: | Toshiba
AL15SE Series, 1.8 TB, 2.5-inch, SAS 12Gbps, 10.5k rpm, 512e (AL15SEB18EQ) |
Test Kit: | System Certification Kit 8.7.1-52.1 |
Config Notes
- Kdump: The crash kernel reserved memory parameters were increased from the default to crashkernel=512M,high crashkernel=72M,low using YaST.
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
|
Adapters and Drivers
| | | | | |
ASPEED
AST2600 |
| Driver Type: Video Driver | Driver Name: ast.ko.zst |
| Driver Date: 11-May-2022 | Driver Size: 31130 |
| Checksum: 734c0cf8a6d7d153f61372e89322ca39 |
|
Intel
Ethernet Converged Network Adapter X710-DA2 (Dual Port) |
| Driver Type: LAN Driver | Driver Name: i40e.ko.zst |
| Driver Date: 11-May-2022 | Driver Size: 249651 |
| Checksum: ff718cab6289f2f9fa5bdb783b0ec335 |
|
Inspur
MT0808M6R (8GB) RAID Adapter |
| Driver Type: HBA Driver | Driver Name: smartpqi.ko.zst |
| Driver Date: 11-May-2022 | Driver Size: 57008 |
| Checksum: 7acec68b6729395f2fb7d963d644ddcf |
| Driver Version: 2.1.12-055 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Inspur Corporation
Building C. NO.2
Xinxi Road
Shangdi, Haidian District
Beijing
100080
CHINA
|