AS-1015CS-TNR

AS-1015CS-TNR
Network Server
Fujitsu

09 Feb 2023
151917

SUSE YES Certified for the following products:
Operating Systems:

SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with XEN Service Pack 1 for SUSE® SLES 11

Product Description
For more information, please check Supermicro Computer Product Web site at https://www.supermicro.com/en/products/system/clouddc/1u/as-1015cs-tnr

Tested Configuration:

Computer Type:	Rack Mount
Mother Board Revision:	0123456789
BIOS/uEFI:	UEFI: 1.1 (01/17/2023)
CPU:	AMD EPYC™ 9654P 2.40 GHz
RAM:	256 GB
Video Adapter:	ASPEED AST2600
Host Bus Adapter:	AMD EPYC 9654P Integrated FCH SATA Controller , Serial ATA (SATA)
Hard Disk Drive:	2 KIOXIA CM6-R Series, NVME SSD, PCIe 4.0, 2.5-inch U.3, 3.84 TB (KCM6XRUL3T84) , NVMe Seagate® Enterprise Capacity 3.5 HDD, 4TB, SATA (ST4000NM0115) , Serial ATA (SATA) Intel Optane™ DC SSD Series, P4801X 375GB, M.2 (SSDPEL1K375GA) , NVMe
Test Kit:	System Certification Kit 8.7.1-52.1

Config Notes

Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration.
SR-IOV: System was tested using SR-IOV where a virtual network adapter was given to the SLES 15 SP4 FV guest. One of the integrated Mellanox® MT27710 ConnectX®-4 Lx EN ports was used in this testing.
The Mellanox Integrated MT27710 ConnectX®-4 Lx EN is configured with one 25GbE port and one 10GbE port.

Adapters and Drivers


ASPEED AST2600
	Driver Type: Video Driver	Driver Name: ast_drv.so
	Driver Date: 29-Oct-2018	Driver Size: 114288
	Checksum: b3f8daf7170ed565963992c55752fb17
	Driver Version: 1.1.5

Supermicro Computer AOC-ATG-i2TM 10Gb (Dual port of RJ45)
	Driver Type: LAN Driver	Driver Name: ixgbe.ko
	Driver Date: 08-Nov-2019	Driver Size: 772792
	Checksum: ff93c743d2dcd3d61f22f44dcb6dd701
	Driver Version: 5.1.0-k

AMD EPYC 9654P Integrated FCH SATA Controller
	Driver Type: HBA Driver	Driver Name: ahci.ko
	Driver Date: 08-Nov-2019	Driver Size: 81304
	Checksum: a9778a47d1b0920ec81c485d11320d39
	Driver Version: 3.0

The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.

https://www.suse.com/product-certification/yes-certified/certification-requirements/

For more information regarding the specific test configuration, please contact:

Fujitsu
Fujitsu Technology Solutions GmbH
Heinz-Nixdorf-Ring 1
Paderborn 33106
GERMANY
Voice: +49 (0)5251 525 2537
Website: http://ts.fujitsu.com/products/standard_servers/index.html

607540

AS-1015CS-TNR - Yes Bulletin 151917 | SUSE