|
 | NF5180-M7-A0-R0-00
Network Server
Fujitsu | 07 Feb 2023
151915 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 with XEN Service Pack 4 for SUSE® SLES 15 |
Product Description
For more detailed info, please visit https://www.inspur.com
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 1.0 |
| BIOS/uEFI: | UEFI: 04.00.00 (01/13/2023) |
| CPU: | 2 Intel
Xeon® Platinum 8490H Processor 1.90 GHz |
| RAM: | 512 GB |
| Video Adapter: | ASPEED
AST2600 |
| Host Bus Adapter: | Broadcom®
LSI MegaRAID 9560-8i
, Serial SCSI (SAS) |
| Hard Disk Drive: | Seagate®
EXOS 10E2400 SAS, 2400GB (ST2400MM0129)
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.7.1-52.1 |
Config Notes
- Persistent Memory: The Persistent Memory in the system was configured in AppDirect Mode only.
- Install: PXE boot, OS installed via network.
- Serial port: The serial port was not tested during certification, and therefore is not supported.
|
Adapters and Drivers
| | | | | |
| ASPEED
AST2600 |
| | Driver Type: Video Driver | Driver Name: ast.ko.zst |
| | Driver Date: 11-May-2022 | Driver Size: 31130 |
| | Checksum: 734c0cf8a6d7d153f61372e89322ca39 |
|
| Intel
Ethernet Converged Network Adapter X710-DA2 (Dual Port) |
| | Driver Type: LAN Driver | Driver Name: i40e.ko.zst |
| | Driver Date: 11-May-2022 | Driver Size: 249651 |
| | Checksum: ff718cab6289f2f9fa5bdb783b0ec335 |
|
| Broadcom®
LSI MegaRAID 9560-8i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko.zst |
| | Driver Date: 11-May-2022 | Driver Size: 91281 |
| | Checksum: 73fe8023764e189c76be50188530b557 |
| | Driver Version: 07.719.03.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
4-1-1 Kamikodanaka, Nakahara-ku,
Kawasaki-shi, Kanagawa 211-8588
JAPAN
|