|
 | H3C UniServer H2200 G5
Network Server
IBM | 13 Jul 2022
151685 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 Service Pack 1 for SUSE® SLES 11 |
Virtual Machines (Guests OS):
| 2
SUSE® Linux Enterprise Server 12 for AMD64 & Intel64 |
|
SP:
Service Pack 5 for SUSE SLES 12 |
Arch:
64 |
Mode:
Fully Virtualized |
|
Windows Server 2019 |
|
Arch:
64 |
Mode:
Fully Virtualized |
Product Description
H3C UniServer H2200 G5
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 0ALME |
| BIOS/uEFI: | UEFI: U47 (05/27/2021) |
| CPU: | 2 Intel
Xeon® Gold 6354 Processor 3.0 GHz |
| RAM: | 512 GB |
| Video Adapter: | Matrox Graphics Inc.
G200eH3 |
| Host Bus Adapter: | HPE
Smart Array E208i-p SR Gen10 Controller
, Serial SCSI (SAS) |
| Hard Disk Drive: | HPE
600GB SAS 12G Enterprise 10K SFF HDD
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 8.7.0-27.2 |
Config Notes
- VM Driver Pack: All FV guests were tested with PV drivers installed. The SLES drivers are included with the OS. The Windows 2012 drivers are available from https://download.suse.com/ (VMDP-WIN-2.2.exe).
- PCI Network Pass-Through: System was tested using PCI pass-through where a network adapter was given to the SLES 12 FV guest. An added Intel 82573E Gigabit Ethernet Controller adapters was used in this testing.
- Maintenance updates: The Linux Kernel 333 updates are required and were installed during certification testing.
- UEFI Configuration: The default "Per Core P-state" setting in the UEFI setup must be changed from Enable to Disable with SLES 12. (F1 Setup --> System Settings --> Processors --> Per Core P-state to Disable).
- Install: System installed via network PXE UEFI boot; the OS was installed using the UEFI boot loader and system configuration. Hard Disk Configuration: RAID 0.
|
Adapters and Drivers
| | | | | |
| Matrox Graphics Inc.
G200eH3 |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 08-Nov-2019 | Driver Size: 103832 |
| | Checksum: 0a84338d028c855ca7c2eae94404eae4 |
|
| Broadcom®
NetXtreme E-Series BCM57412 10GbE PCIe 3.0 Ethernet Controller (Dual Port) |
| | Driver Type: LAN Driver | Driver Name: bnxt_en.ko |
| | Driver Date: 08-Nov-2019 | Driver Size: 431968 |
| | Checksum: e5f964d16bb61e985fcf6a68852ecc42 |
| | Driver Version: 1.10.0 |
|
| HPE
Smart Array E208i-p SR Gen10 Controller |
| | Driver Type: HBA Driver | Driver Name: smartpqi.ko |
| | Driver Date: 09-Nov-2019 | Driver Size: 170904 |
| | Checksum: e2c3205abf4de15d9a588408d62d7bef |
| | Driver Version: 1.2.6-015 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|