|
 | PRIMERGY® RX4770 M6
Network Server
NEC Corporation | 16 Mar 2022
151269 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® LINUX Enterprise Server 10 for AMD64 & Intel64 with XEN Service Pack 3 for SUSE® SLES 10 |
Product Description
For more detailed information, please refer to http://www.fujitsu.com
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | D3892 |
| BIOS/uEFI: | UEFI: R1.7.0 (02/05/2021) |
| CPU: | 4 Intel
Xeon® Gold 6330H Processor 2.00 GHz |
| RAM: | 384 GB |
| Ports and Bus Types: | 5 USB Ports 11 PCI Express X16 |
| Video Adapter: | Matrox®
G200e |
| Host Bus Adapter: | Fujitsu
PRAID EP540i
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Seagate®
Enterprise Performance 10K HDD 600GB (ST600MM0039)
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.5.0-29.4 |
Config Notes
- The pci:use_crs kernel boot parameter is required.
- SLES-10-SP3 (x86_64): System was tested with rev .58.1 update kernel due to a kernel oops which may occur when initializing the network devices. This update is available from support.novell.com or standard online update methods. The drivers used are part of this update.
- Since the Xen kernel only supports 64 processors, the system BIOS was configured to only enable 64 of the 96 processors.
- The following Xen hypervisor boot parameters are required: dom0_mem=1024M xenheap_megabytes=64
|
Referenced Bulletins
131280
Adapters and Drivers
| | | | | |
| Matrox®
G200e |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 08-Nov-2019 | Driver Size: 103832 |
| | Checksum: 0a84338d028c855ca7c2eae94404eae4 |
|
| | Driver Type: Video Driver | Driver Name: mga_drv.so |
| | Driver Date: 18-Oct-2019 | Driver Size: 140704 |
| | Checksum: e2824ae4216b6c516c7f23e96937ac40 |
|
| Fujitsu
PLAN EP X710-DA2 2X10Gb SFP |
| | Driver Type: LAN Driver | Driver Name: i40e.ko |
| | Driver Date: 09-Nov-2019 | Driver Size: 785376 |
| | Checksum: 25d46e9f773e656f68039107206284cc |
| | Driver Version: 2.8.20-k |
|
| Fujitsu
PRAID EP540i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 09-Nov-2019 | Driver Size: 309256 |
| | Checksum: a649376d8c32760e3d73ee1c44058ef7 |
| | Driver Version: 07.707.51.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
NEC Corporation
1-10 Nissin-cho, Fuchu-shi
Tokyo
183-8501
JAPAN
Voice: (+81) 42 333 1324
Fax: (+81) 42 333 1821
|