|
 | H3C UniServer R2700 G3
Network Server
Fujitsu | 02 Nov 2021
151034 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 with XEN Service Pack 5 for SUSE® SLES 15 |
Product Description
H3C UniServer R2700 G3
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 0302A3U0 |
| BIOS/uEFI: | UEFI: 2.00.51 (07/06/2021) |
| CPU: | 2 Intel
Xeon® Gold 6242 Processor 2.80 GHz |
| RAM: | 272 GB |
| Ports and Bus Types: | 2 PCI Express X8 5 USB Ports |
| Video Adapter: | ASPEED
AST2000 |
| Host Bus Adapter: | LSI Logic
MegaRAID SAS 9361-8i
, Serial SCSI (SAS) |
| Hard Disk Drive: | Micron Technology, Inc.
5300 PRO, 2.5-inch SATA SSD 6Gbps 480GB (MTFDDAK480TDS)
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 8.6.1-38.3 |
Config Notes
- Serial port: General purpose serial port functionality is not provided by the hardware. Therefore the serial port is supported only for accessing the ILOM and the serial port certification test has been waived.
- Install: OS was installed by PXE from TC.
|
Adapters and Drivers
| | | | | |
| ASPEED
AST2000 |
| | Driver Type: Video Driver | Driver Name: ast.ko.xz |
| | Driver Date: 06-May-2021 | Driver Size: 21908 |
| | Checksum: 3fd2789ab1ef02a360fa8925d5da5277 |
| | Driver Version: C735CC4D15DEF20D |
|
| New H3C Technologies Co., Ltd.
Ethernet Adapter 360T-B (quad-port) |
| | Driver Type: LAN Driver | Driver Name: igb.ko.xz |
| | Driver Date: 06-May-2021 | Driver Size: 98008 |
| | Checksum: 1cbc21bf73558e74465adede4d6163af |
|
| LSI Logic
MegaRAID SAS 9361-8i |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko.xz |
| | Driver Date: 06-May-2021 | Driver Size: 68420 |
| | Checksum: cdc7bfa63964ba2caa52b643881b6a11 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
4-1-1 Kamikodanaka, Nakahara-ku,
Kawasaki-shi, Kanagawa 211-8588
JAPAN
|