|
 | ProLiant XL420 Gen10 Plus (Apollo 4200) (3rd Gen-2.2, 32c)
Network Server
IBM | 15 Jul 2021
150504 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server for IBM Power 12 Service Pack 2 for SUSE® SLES 12 |
Product Description
For more information please visit. https://www.hpe.com/us/en/servers.html
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | Gen10 Plus |
| BIOS/uEFI: | UEFI: U50 (04/28/2021) |
| CPU: | 2 Intel
Xeon® Platinum 8352Y Processor 2.20 GHz |
| RAM: | 6 TB |
| Ports and Bus Types: | 4 USB Ports Serial 2 PCI Express X16 PCI Express X8 |
| Video Adapter: | Matrox Graphics Inc.
G200eH3 |
| Host Bus Adapter: | HPE
Smart Array P408i-a SR Gen10 Controller
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 HPE
3.2TB SAS 12G Mixed Use SFF BC SS540 SSD
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.5.0-29.4 |
Config Notes
- Install: The SUSE® Linux Enterprise Server install was performed using a network install method.
- Power management: The System/Processor dynamic CPU frequency scaling functionality in SLES is not supported on POWER8 as this functionality is provided by the POWER8 hardware itself.
- Kdump: the crash kernel reserved memory parameters were changed based on the content in the following knowledge-base article: https://www.suse.com/support/kb/doc.php?id=3374462.
- Headless configuration - no graphics adapter. System configured using IBM remote Hardware Management Console (HMC) for graphics, keyboard and mouse.
|
Referenced Bulletins
145163
Adapters and Drivers
| | | | | |
| Matrox Graphics Inc.
G200eH3 |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 08-Nov-2019 | Driver Size: 103832 |
| | Checksum: 0a84338d028c855ca7c2eae94404eae4 |
|
| HPE
Ethernet 1Gb 4-port Base-T I350-T4 OCP3 Adapter |
| | Driver Type: LAN Driver | Driver Name: igb.ko |
| | Driver Date: 08-Nov-2019 | Driver Size: 501448 |
| | Checksum: f89f71f9f1bb0535e16c00d825b1223c |
| | Driver Version: 5.6.0-k |
|
| HPE
Smart Array P408i-a SR Gen10 Controller |
| | Driver Type: HBA Driver | Driver Name: smartpqi.ko |
| | Driver Date: 09-Nov-2019 | Driver Size: 170904 |
| | Checksum: e2c3205abf4de15d9a588408d62d7bef |
| | Driver Version: 1.2.6-015 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|