 | UCS-S3260-M5SRB
Network Server Kyocera Mita Corporation | 23 Jun 2021
150411 |
SUSE YES Certified for the following products:
Operating Systems:
| Novell Open Enterprise Server 2 (NetWare) Support Pack 2 for Open Enterprise Server 2 |
Product Description
For more information, please visit: http://www.cisco.com/c/en/us/support/servers-unified-computing/unified-computing-system/products-technical-reference-list.html
Tested Configuration:
| Computer Type: | Rack Mount |
| Mother Board Revision: | 73-101213-03 |
| BIOS/uEFI: | UEFI: S3X60M5.4.1.3e.0.0502211336 (05/02/2021) |
| CPU: | 2 Intel Xeon® Gold 6252 Processor 2.10 GHz |
| RAM: | 32 GB |
| Ports and Bus Types: | Serial 3 PCI Express X8 PCI Express X4 |
| Video Adapter: | Matrox Graphics Inc. G200 SE A (PCI) |
| Host Bus Adapter: | Cisco UCS S3260 Direct Dual Raid Controller , Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Toshiba MG Series, 2 TB, SAS (MG04SCA20EN) , Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.6.0-33.1 |
Config Notes
|
Adapters and Drivers
| Matrox Graphics Inc. G200 SE A (PCI) | |||||||||
| Driver Type: Video Driver | Driver Name: swrast_dri.so | ||||||||
| Driver Date: 21-Feb-2021 | Driver Size: 21788696 | ||||||||
| Driver Version: 0x02 | |||||||||
|
|
|||||||||
| Cisco UCS S3260 Direct Dual Raid Controller | |||||||||
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko.xz | ||||||||
| Driver Date: 06-May-2021 | Driver Size: 68420 | ||||||||
| Checksum: cdc7bfa63964ba2caa52b643881b6a11 | |||||||||
|
|
|||||||||
| Cisco UCS VIC 1495 Dual Port | |||||||||
| Driver Type: LAN Driver | Driver Name: enic.ko.xz | ||||||||
| Driver Date: 06-May-2021 | Driver Size: 39700 | ||||||||
| Driver Version: 0xa2 | |||||||||
|
|
|||||||||
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin. For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Kyocera Mita Corporation
2-28, 1-Chome, Tamatsukuri, Chuo-ku
Osaka 540-8585
JAPAN
Voice: +81-6-6764-3555
Fax: +81-6-6764-3980
Website: www.kyoceramita.com