|
| PRIMERGY® RX2540 M1
Network Server
Fujitsu | 19 Apr 2021
150206 |
SUSE "YES" Enterprise Certified with the following products:
Operating Systems:
SUSE® Linux Enterprise Server 15 for AMD64 & Intel64 Service Pack 1 for SUSE® SLES 15 |
Product Description
Fujitsu PRIMERGY RX2540 M1 server for use in Fujitsu ETERNUS CD10000 S2 systems.
Tested Configuration:
Computer Type: | Rack Mount |
Mother Board Revision: | D3289 |
BIOS/uEFI: | UEFI-Legacy: R1.40.0 (01/20/2020) |
CPU: | 2 Intel
Xeon® Processor E5-2640 v3 2.60 GHz |
RAM: | 192 GB |
Ports and Bus Types: | 3 PCI Express X8 3 PCI Express X16 |
Video Adapter: | Matrox®
G200e |
Host Bus Adapter: | Fujitsu
PRAID EP420i
, Serial SCSI (SAS) Fujitsu
PRAID EP420e
, Serial SCSI (SAS) |
Hard Disk Drive: | 2 Western Digital
WD2001FYYG
, Serial SCSI (SAS) |
Test Kit: | System Certification Kit 8.5.0-29.1 |
Config Notes
- Install: PXE boot, OS installed via network.
- The system is used only as a part of Fujitsu ETERNUS CD10000 S2 nodes and supported on the listed OS for use in SUSE Enterprise Storage 6 or later environments.
|
Adapters and Drivers
| | | | | |
Matrox®
G200e |
| Driver Type: Video Driver | Driver Name: mgag200.ko |
| Driver Date: 14-May-2019 | Driver Size: 102080 |
| Checksum: 07cad92cf9d842281e5e704f469b323c |
|
Intel
Ethernet Converged Network Adapter X540-T2 (Dual Port) |
| Driver Type: LAN Driver | Driver Name: ixgbe.ko |
| Driver Date: 14-May-2019 | Driver Size: 763576 |
| Checksum: f160e08f8e47a25791d317e0d0e15fbe |
| Driver Version: 5.1.0-k |
|
Fujitsu
PRAID EP420i |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 14-May-2019 | Driver Size: 296104 |
| Checksum: 0c021a1293826b2f98a1f58789f0ebda |
| Driver Version: 07.707.50.00-rc1 |
|
Fujitsu
PRAID EP420e |
| Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| Driver Date: 14-May-2019 | Driver Size: 296104 |
| Checksum: 0c021a1293826b2f98a1f58789f0ebda |
| Driver Version: 07.707.50.00-rc1 |
|
The term SUSE "YES" Enterprise Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
4-1-1 Kamikodanaka, Nakahara-ku,
Kawasaki-shi, Kanagawa 211-8588
JAPAN
|