|
 | PowerEdge MX740c
Network Server
Fujitsu | 14 Apr 2021
150195 |
SUSE YES Certified for the following products:
Operating Systems:
|
SUSE® Linux Enterprise Server 11 for AMD64 & Intel64
Service Pack 3 for SUSE® SLES 11 |
Product Description
Please visit www.dell.com for more information.
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | A01 |
| BIOS/uEFI: | UEFI: 2.10.2 (02/25/2021) |
| CPU: | 2 Intel
Xeon® Platinum 8280L Processor 2.70 GHz |
| RAM: | Host: 3 TB, 64-bit VM Guests: 768 GB, Single Max VM 64-bit Guest Tested Memory: 2 TB |
| Ports and Bus Types: | 2 USB Ports 3 PCI Express X16 2 PCI Express X8 |
| Video Adapter: | Matrox®
G200eW3 |
| Host Bus Adapter: | Dell
PERC H745P MX
, Serial SCSI (SAS) |
| Hard Disk Drive: | 2 Seagate®
ST2000NX0243, 2TB, 2.5, SATA
, Serial ATA (SATA) |
| Test Kit: | System Certification Kit 8.5.0-29.4 |
Config Notes
- Graphics: Video driver used in testing was downloaded from http://www.hp.com/support/workstations. Video driver is not SolidDriver-compliant and requires installation of kernel source and development tools.
- Install: Kernel boot parameter "nomodeset" was added during installation.
- Kdump: kdump should be enabled (using "yast2 kdump") before installation of NVIDIA driver.
|
Adapters and Drivers
| | | | | |
| Matrox®
G200eW3 |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 06-Jun-2020 | Driver Size: 82584 |
| | Checksum: f4565df412097c9a985a175aae408518 |
|
| 2 QLogic
QL41262HMKR CNA (Dual Port) |
| | Driver Type: LAN Driver | Driver Name: qede.ko |
| | Driver Date: 07-Jun-2020 | Driver Size: 268464 |
| | Checksum: 2f0bd93d505d68b2630c23bb25022750 |
| | Driver Version: 8.37.0.20 |
|
| Dell
PERC H745P MX |
| | Driver Type: HBA Driver | Driver Name: megaraid_sas.ko |
| | Driver Date: 07-Jun-2020 | Driver Size: 307352 |
| | Checksum: 6a8ab28719545a1f0f5b94fb61320d48 |
| | Driver Version: 07.713.01.00-rc1 |
|
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
Fujitsu
Fujitsu Technology Solutions GmbH
Heinz-Nixdorf-Ring 1
Paderborn
33106
GERMANY
Website: http://ts.fujitsu.com/products/standard_servers/index.html
|