|
 | UCS B260 M4
Network Server
IBM | 03 Nov 2020
149880 |
SUSE YES Certified for the following products:
Operating Systems:
| SUSE® Linux Enterprise Server 11 for AMD64 & Intel64 with KVM Service Pack 3 for SUSE® SLES 11 |
Product Description
UCS B260 M4
Tested Configuration:
| Computer Type: | Blade Module |
| Mother Board Revision: | 73-16804-05 |
| BIOS/uEFI: | UEFI: EXM4.4.0.2a.0.1016181503 (10/16/2018) |
| CPU: | 2 Intel
Xeon® Processor E7-8890 v4 2.20 GHz |
| RAM: | 500 GB |
| Ports and Bus Types: | 6 PCI Express X16 |
| Video Adapter: | Matrox Graphics Inc.
G200 SE A (PCI) |
| Host Bus Adapter: | LSI Logic
MegaRAID SAS-3 3108
, Serial SCSI (SAS) |
| Hard Disk Drive: | Toshiba
PX02SMF040
, Serial SCSI (SAS) |
| Test Kit: | System Certification Kit 8.5.0-29.1 |
Config Notes
- Install: System booted to DVD, and OS installed via network.
- All listed drivers are SUSE SolidDriver compliant and are delivered as part of the Forward! by Unisys™ (PEPP) product.
- The s-Par firmware version is 4.4.20.30279 (2016-12-2)
|
Adapters and Drivers
| | | | | |
| Matrox Graphics Inc.
G200 SE A (PCI) |
| | Driver Type: Video Driver | Driver Name: mgag200.ko |
| | Driver Date: 06-Jun-2020 | Driver Size: 82584 |
| | Checksum: f4565df412097c9a985a175aae408518 |
|
| Cisco
UCS Virtual Interface Card 1240 (NIC) |
| | Driver Type: LAN Driver | Driver Name: enic.ko |
| | Driver Date: 06-Jun-2020 | Driver Size: 197272 |
| |
| | Driver Version: 2.3.0.53 |
|
| LSI Logic
MegaRAID SAS-3 3108 |
The term SUSE YES Certified applies only to the exact configuration documented in this bulletin.
For more information on hardware exchange policies, please access the following document and view the Hardware Component Exchange Guide.
https://www.suse.com/product-certification/yes-certified/certification-requirements/
For more information regarding the specific test configuration, please contact:
IBM
For support regarding this specific configuration, please visit:
www.ibm.com
|